Ive had my rig running for the past month, and the hash rate that im getting is around 172. im getting around 29 hash for most of my cards, but 2 of my cards are giving me between 24-26. its not that big of issue, as my rig is stable, but im just wondering what it could be, as each card has been flashed
↧
Low Hash Rate On 2 Cards (RX580-8Gb)
↧
are the USB cables for PCI-e risers on 16x to 1x interchangeable?
I'm asking about the cables in blue, white, red, those alone, and not the small pcb that you connect to pcie slots.
↧
↧
Got incorrect temperature 511, ignore
Hi
After Claymore Eth miner ran for 2 days, I got the following error and the system rebooted. I got this error earlier also.
First it says : Got incorrect temperature 511, ignore
Then : WATCHDOG: GPU 3 hangs in OpenCL call, exit
Lastly : OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
Can you please suggest what is needed to be done to resolve this. ?
I have stock settings, no overclocking or undervolting etc.
Thanks in advance!
Gurpreet
====================================================
====================================================
10:37:08:057 97c Got incorrect temperature 511, ignore
10:37:08:088 97c GPU 1 temp = 58, old fan speed = 80, new fan speed = 75
10:37:08:119 97c GPU 2 temp = 58, old fan speed = 79, new fan speed = 75
10:37:08:135 97c GPU 3 temp = 53, old fan speed = 83, new fan speed = 75
10:37:11:463 97c Got incorrect temperature 511, ignore
10:37:11:479 97c GPU 1 temp = 58, old fan speed = 80, new fan speed = 75
10:37:11:495 97c GPU 2 temp = 58, old fan speed = 80, new fan speed = 75
10:37:11:510 97c GPU 3 temp = 54, old fan speed = 80, new fan speed = 75
10:37:11:557 97c Got incorrect temperature 511, ignore
10:37:11:588 97c GPU0 t=0C fan=0%, GPU1 t=58C fan=80%, GPU2 t=58C fan=80%, GPU3 t=54C fan=80%
10:37:11:604 97c em hbt: 0, fm hbt: 16,
10:37:11:604 97c watchdog - thread 0, hb time 125
10:37:11:620 97c watchdog - thread 1, hb time 343
10:37:11:620 97c watchdog - thread 2, hb time 281
10:37:11:635 97c watchdog - thread 3, hb time 109
10:37:11:635 97c watchdog - thread 4, hb time 234
10:37:11:635 97c watchdog - thread 5, hb time 31
10:37:11:651 97c watchdog - thread 6, hb time 75657
10:37:11:651 97c WATCHDOG: GPU 3 hangs in OpenCL call, exit
10:37:11:667 97c watchdog - thread 7, hb time 75859
10:37:11:667 97c WATCHDOG: GPU 3 hangs in OpenCL call, exit
10:37:11:682 97c Rebooting
10:37:11:807 97c OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
10:37:11:807 97c Failed to set fan info
10:37:11:823 97c OC v7, Reset control for GPU 1, close miner right now if you want to use default control from Catalyst
10:37:11:838 97c OC v7, Reset control for GPU 2, close miner right now if you want to use default control from Catalyst
10:37:11:854 97c OC v7, Reset control for GPU 3, close miner right now if you want to use default control from Catalyst
After Claymore Eth miner ran for 2 days, I got the following error and the system rebooted. I got this error earlier also.
First it says : Got incorrect temperature 511, ignore
Then : WATCHDOG: GPU 3 hangs in OpenCL call, exit
Lastly : OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
Can you please suggest what is needed to be done to resolve this. ?
I have stock settings, no overclocking or undervolting etc.
Thanks in advance!
Gurpreet
====================================================
====================================================
10:37:08:057 97c Got incorrect temperature 511, ignore
10:37:08:088 97c GPU 1 temp = 58, old fan speed = 80, new fan speed = 75
10:37:08:119 97c GPU 2 temp = 58, old fan speed = 79, new fan speed = 75
10:37:08:135 97c GPU 3 temp = 53, old fan speed = 83, new fan speed = 75
10:37:11:463 97c Got incorrect temperature 511, ignore
10:37:11:479 97c GPU 1 temp = 58, old fan speed = 80, new fan speed = 75
10:37:11:495 97c GPU 2 temp = 58, old fan speed = 80, new fan speed = 75
10:37:11:510 97c GPU 3 temp = 54, old fan speed = 80, new fan speed = 75
10:37:11:557 97c Got incorrect temperature 511, ignore
10:37:11:588 97c GPU0 t=0C fan=0%, GPU1 t=58C fan=80%, GPU2 t=58C fan=80%, GPU3 t=54C fan=80%
10:37:11:604 97c em hbt: 0, fm hbt: 16,
10:37:11:604 97c watchdog - thread 0, hb time 125
10:37:11:620 97c watchdog - thread 1, hb time 343
10:37:11:620 97c watchdog - thread 2, hb time 281
10:37:11:635 97c watchdog - thread 3, hb time 109
10:37:11:635 97c watchdog - thread 4, hb time 234
10:37:11:635 97c watchdog - thread 5, hb time 31
10:37:11:651 97c watchdog - thread 6, hb time 75657
10:37:11:651 97c WATCHDOG: GPU 3 hangs in OpenCL call, exit
10:37:11:667 97c watchdog - thread 7, hb time 75859
10:37:11:667 97c WATCHDOG: GPU 3 hangs in OpenCL call, exit
10:37:11:682 97c Rebooting
10:37:11:807 97c OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
10:37:11:807 97c Failed to set fan info
10:37:11:823 97c OC v7, Reset control for GPU 1, close miner right now if you want to use default control from Catalyst
10:37:11:838 97c OC v7, Reset control for GPU 2, close miner right now if you want to use default control from Catalyst
10:37:11:854 97c OC v7, Reset control for GPU 3, close miner right now if you want to use default control from Catalyst
↧
ROG STRIX B250F GAMING motherboard for Eth mining
Hi,
I am trying to setup a 6 GPU Rig. I am using ROG STRIX B250F GAMING motherboard. I have been successful in connecting 4 RX 480 8gb OC Sapphire onto it. But as soon as i go over that, it starts showing errors.
Has anyone been using this board . I was facing Code 12 issue earlier. then driver crashed.
Specs
ROG STRIX B250F GAMING
Sapphire RX 480 OC 8GB (4 as of now, want to connect 6)
8GB DDR4
G4400 3.3 GHz Dual Core CPU
Win 10 Pro 64 bit
Please suggest what should i do to get all 6 GPU working.
Regards
Chirash
I am trying to setup a 6 GPU Rig. I am using ROG STRIX B250F GAMING motherboard. I have been successful in connecting 4 RX 480 8gb OC Sapphire onto it. But as soon as i go over that, it starts showing errors.
Has anyone been using this board . I was facing Code 12 issue earlier. then driver crashed.
Specs
ROG STRIX B250F GAMING
Sapphire RX 480 OC 8GB (4 as of now, want to connect 6)
8GB DDR4
G4400 3.3 GHz Dual Core CPU
Win 10 Pro 64 bit
Please suggest what should i do to get all 6 GPU working.
Regards
Chirash
↧
RX 580: Get LOTS of incorrect shares but no memory errors
I have a problem with the 5th rig i build.
It is running 6x Gigabyte RX580 8 GB cards, they have one-step-modded bioses, i tuned each card individually with OverdriveNTool and have Hwinfo64 running and showing no (or VERY little) memory errors. It's running Claymore (10.3 at first, 11.0 now) and except for the GPUs it's an identical setup as the first 4 rigs (the first rigs have XFX cards).
Eventhough i get no memory errors, 3 gpus keep getting a mayor amount of invalid shares. It are the same gpus all the time (gpu0, 3 and 5). I changed risers and the problem remains. It seems like the longer the rig runs, the more invalid shares it gets.
How can it be that i keep on receiving invalid shares while the gpus have no memory errors? What am i missing?
It is running 6x Gigabyte RX580 8 GB cards, they have one-step-modded bioses, i tuned each card individually with OverdriveNTool and have Hwinfo64 running and showing no (or VERY little) memory errors. It's running Claymore (10.3 at first, 11.0 now) and except for the GPUs it's an identical setup as the first 4 rigs (the first rigs have XFX cards).
Eventhough i get no memory errors, 3 gpus keep getting a mayor amount of invalid shares. It are the same gpus all the time (gpu0, 3 and 5). I changed risers and the problem remains. It seems like the longer the rig runs, the more invalid shares it gets.
How can it be that i keep on receiving invalid shares while the gpus have no memory errors? What am i missing?
↧
↧
Asus Strix R9 380 4GB Memory Hynix bios
Hello, someone have good bios? now i have 23.5mh/s with 250w. Im interested modification low power with this same mh/s if posible?
↧
Random GPU Hangs (Any GPU, Any Slot, Any Time)
Hi Everyone
Firstly - Just want to say this forum is by far the most informative and most helpful I've come across... and I feel bad I've recently opened a few discussions for help that I needed but I've not really had the time to give any help back to others so I will from today try to be more interactive as well. I do however try to keep all my discussions updated with latest resolution in case someone else with the same issue does land on it![:smile:]( ":smile:")
Before I dive right into the problem, I want to make this thread as in-depth as possible because from searching day & night on the net I've seen a lot of people are having a similar issue and struggling to find a solution. Hopefully, this will give me best chance at finding a solution and helping others.
My Build:
MSI Z170A Tomahawk Motherboard (Purchased New)
Intel Pentium G4400 Skylake LGA 1151 Processor (Purchased New)
4x 4Gb (16Gb) DDR4 DIMM Ram 2300Mhz (Purchased Used)
3x R9 290 & 3x R9 290x GPUs (Purchased Used)
2x 1000w Corsair PSUs (2kw) (Purchased 1 New + 1 Used)
Currently running on Windows 10 Pro 64-Bit
Powered Risers (Latest Ver 008S)
Windows Settings:
Windows Update > Disabled
AMD Overdrive > Disabled
Windows Defender > Apps & Files > Disabled
Virtual Memory > Increased to 20,000Mb (20Gb)
Battery & Performance > High Performance (Never Sleep, Never Hibernate, Never Screen Off, PCIE Never Off)
BIOS Settings:
Updated to latest MSI BIOS from MSI website > Yes (Successful, no errors)
PCIE Speed> Auto
Dim Link Speed > Auto
4G Decoding / Multi GPU Mining > Enabled
Primary Boot Display > PGE
VD-T > Disabled
HD Audio Controller > Disabled
Serial Port > Disabled
Parallel Port > Disabled
Power Management > Power On after AC Power Loss > Enabled
Boot Sequence > USB then SSD
***THE PROBLEM***
I started with Simplemining.net (smOS) as my preferred OS. I could get 3 GPUs detected and start mining perfectly but after a short time (10min-5hrs) I would see one GPU stop hashing. It can be any GPU, on any slot at any time. I then changed all my risers to the new Ver 008S risers and managed to get 5 GPUs detected but the problem was still there, one random GPU would hang (any gpu, any slot, any time).
When a GPU stops hashing, the others continue for a while but after a minute or two the miner reloads and the GPU starts hashing again. Then it will hang again or another might hang... and sometimes 2 can hang and the third might drop from 26Mh/s to something like 15...8...1Mhs and then the whole system would reboot. Sometimes it might force a reboot straight after the first GPU hanging as well. It's very random.
I have since tried HiveOS and Perfectmining.io but all three give the same issue - I then assumed it was an Ubuntu issue as some said changing to Windows resolved it for them. I also took the time to open all my GPUs and clean them.. cleaned the board, the fan, intercooler and heatsink & I applied new thermal paste.
Yesterday installed Windows 10 Pro, updated it and then switched off further updates. I installed the Adrenaline drivers from AMD (Latest AMDGPU Pro) and began hashing on all 5 GPUs using Claymore V10.2 but the same thing started to happen. I then downloaded Claymore V11.1 and again, the same thing was happening.
If I noticed that GPU2 for example would hang like 3x in a row, I would shut down; disconnect GPU2 and then reboot but then it would be another GPU that hangs, eventually I'd be left with 1 GPU connected and still it can hang randomly.
This morning I've uninstalled the latest AMD drivers using DDU and then installed the 15.12 drivers as recommended on a lot of sites for older cards. I noticed fan control conflicts with miner, msi afterburner and amd overdrive so I disabled amd overdrive and added -tt 1 to the miner config, this has resolved fan control issues.
I've tried again with Claymore V11.1 but it hanged pretty much straight away with just 1 GPU connected. So I'm currently testing with Claymore V10.0 and with 1 GPU connected it is so far running for about an hour (Dual Mining ETH + DCR)... Eth = 42shares so far + DCR = 40 shares so far with 1 rejection on DCR and 0 on Eth. - I'm thinking to let this run overnight before considering connecting a 2nd GPU. It's currently 3:30pm here so that would be a decent 15hr test I think, which would be the lost i've managed to get it to run lol.
Some people suggest clocking back or reflashing GPU bios but all my GPU's are showing STOCK OC on MSI, I did not OC any of them and I haven't messed with flashing any GPU bios. I also don't believe previous owners would have flashed them because from what I've read online there is no point doing that with the R9's.
I've been having this problem for about 5-6 weeks now and I don't know what else I can try. I checked my PSU's and with 5 cards connected they are taking 550w + 740w from the wall. Well under the 1000w capacity but anyway the problem happens with even 1-2 GPUs connected so it's not a PSU issue.
Can someone please help me and guide me through how to find the problem and rectify it?![:disappointed:]( ":disappointed:")
Firstly - Just want to say this forum is by far the most informative and most helpful I've come across... and I feel bad I've recently opened a few discussions for help that I needed but I've not really had the time to give any help back to others so I will from today try to be more interactive as well. I do however try to keep all my discussions updated with latest resolution in case someone else with the same issue does land on it
Before I dive right into the problem, I want to make this thread as in-depth as possible because from searching day & night on the net I've seen a lot of people are having a similar issue and struggling to find a solution. Hopefully, this will give me best chance at finding a solution and helping others.
My Build:
MSI Z170A Tomahawk Motherboard (Purchased New)
Intel Pentium G4400 Skylake LGA 1151 Processor (Purchased New)
4x 4Gb (16Gb) DDR4 DIMM Ram 2300Mhz (Purchased Used)
3x R9 290 & 3x R9 290x GPUs (Purchased Used)
2x 1000w Corsair PSUs (2kw) (Purchased 1 New + 1 Used)
Currently running on Windows 10 Pro 64-Bit
Powered Risers (Latest Ver 008S)
Windows Settings:
Windows Update > Disabled
AMD Overdrive > Disabled
Windows Defender > Apps & Files > Disabled
Virtual Memory > Increased to 20,000Mb (20Gb)
Battery & Performance > High Performance (Never Sleep, Never Hibernate, Never Screen Off, PCIE Never Off)
BIOS Settings:
Updated to latest MSI BIOS from MSI website > Yes (Successful, no errors)
PCIE Speed> Auto
Dim Link Speed > Auto
4G Decoding / Multi GPU Mining > Enabled
Primary Boot Display > PGE
VD-T > Disabled
HD Audio Controller > Disabled
Serial Port > Disabled
Parallel Port > Disabled
Power Management > Power On after AC Power Loss > Enabled
Boot Sequence > USB then SSD
***THE PROBLEM***
I started with Simplemining.net (smOS) as my preferred OS. I could get 3 GPUs detected and start mining perfectly but after a short time (10min-5hrs) I would see one GPU stop hashing. It can be any GPU, on any slot at any time. I then changed all my risers to the new Ver 008S risers and managed to get 5 GPUs detected but the problem was still there, one random GPU would hang (any gpu, any slot, any time).
When a GPU stops hashing, the others continue for a while but after a minute or two the miner reloads and the GPU starts hashing again. Then it will hang again or another might hang... and sometimes 2 can hang and the third might drop from 26Mh/s to something like 15...8...1Mhs and then the whole system would reboot. Sometimes it might force a reboot straight after the first GPU hanging as well. It's very random.
I have since tried HiveOS and Perfectmining.io but all three give the same issue - I then assumed it was an Ubuntu issue as some said changing to Windows resolved it for them. I also took the time to open all my GPUs and clean them.. cleaned the board, the fan, intercooler and heatsink & I applied new thermal paste.
Yesterday installed Windows 10 Pro, updated it and then switched off further updates. I installed the Adrenaline drivers from AMD (Latest AMDGPU Pro) and began hashing on all 5 GPUs using Claymore V10.2 but the same thing started to happen. I then downloaded Claymore V11.1 and again, the same thing was happening.
If I noticed that GPU2 for example would hang like 3x in a row, I would shut down; disconnect GPU2 and then reboot but then it would be another GPU that hangs, eventually I'd be left with 1 GPU connected and still it can hang randomly.
This morning I've uninstalled the latest AMD drivers using DDU and then installed the 15.12 drivers as recommended on a lot of sites for older cards. I noticed fan control conflicts with miner, msi afterburner and amd overdrive so I disabled amd overdrive and added -tt 1 to the miner config, this has resolved fan control issues.
I've tried again with Claymore V11.1 but it hanged pretty much straight away with just 1 GPU connected. So I'm currently testing with Claymore V10.0 and with 1 GPU connected it is so far running for about an hour (Dual Mining ETH + DCR)... Eth = 42shares so far + DCR = 40 shares so far with 1 rejection on DCR and 0 on Eth. - I'm thinking to let this run overnight before considering connecting a 2nd GPU. It's currently 3:30pm here so that would be a decent 15hr test I think, which would be the lost i've managed to get it to run lol.
Some people suggest clocking back or reflashing GPU bios but all my GPU's are showing STOCK OC on MSI, I did not OC any of them and I haven't messed with flashing any GPU bios. I also don't believe previous owners would have flashed them because from what I've read online there is no point doing that with the R9's.
I've been having this problem for about 5-6 weeks now and I don't know what else I can try. I checked my PSU's and with 5 cards connected they are taking 550w + 740w from the wall. Well under the 1000w capacity but anyway the problem happens with even 1-2 GPUs connected so it's not a PSU issue.
Can someone please help me and guide me through how to find the problem and rectify it?
↧
www.Europemineshop.com - Final Opportunity
Starting with March 5 2018 all prices on our products will be increased with 20% – 40%.
This is final opportunity to buy your favorite product at unbeatable price !!!
Come today and buy your favorite product from www.Europemineshop.com - Legit Europe Mining Rigs & Parts e-Shop
Click Here for our products
![]()
This is final opportunity to buy your favorite product at unbeatable price !!!
Come today and buy your favorite product from www.Europemineshop.com - Legit Europe Mining Rigs & Parts e-Shop
Click Here for our products
↧
I hope everyone can help me! thank you all!
Hello! I am Jimmie Brzezinski from Germany. I used to have 578 Ethereum's recent drop in Ethereum, which made me bankrupt because I used leverage trading. I knew it was my fault. I am the only house now. The car has been mortgaged by the bank. I Now nothing, I became a tramp, everything is too greedy, if I have the opportunity I will not be leveraged transactions, I want to go back in the past, I hope you can help me, I will thank you, hope You can donate Ethereum to help me through the storm, God will bless you, if you donate please give me a message, or contact my email Jimmie847@outlook.com
Leave your contact information, if one day I have a lot of income, I will give you back! Thank you!
Leave your contact information, if one day I have a lot of income, I will give you back! Thank you!
↧
↧
Calculated hashrate higher than reported? (169 Mh/s vs 173 Mh/s)
How is this possible? I thought the reported hashrate represented the best case scenario.
In that case what is the highest calculated hashrate possible? Can this be calculated?
In that case what is the highest calculated hashrate possible? Can this be calculated?
↧
Mining rig help!!
So I built a multi gpu mining rig using older gaming cards bought used. I have 2 r9 290xs, a r9 290 and an r9 390. Running on an msi z170a with an i5 6500t , 8gb ram, with a 750 and 1200w psu. Had slight stability issue but had it running nice. Rebooting ever other day for the last week. So one morning I wake up and see that windows had frozen. Did a reboot and my 290 had an opencl error couldn’t write dag for buffer. Tried uninstalling and reinstalling everything, switching risers, virtual memory is fine. Even by itself when the card tries to mine I get that error or the system crashes and I check event log and it says there was a bug check and memory dump but I have no idea how to check the memory dump. The card shows up in device manager, afterburner, gpu-z and claymore. It is running and fine until under load. Shouldn’t be a psu issue as it was running fine for weeks. Have tried lidag gser and eres commands with no luck. Best I got was after freshly installing it was mining for maybe one minute with all four cards before crashing and getting same error or crash. Getting another 290x and brand new 1080ti tomorrow to add so will do more tests. Any ideas? I know there’s a good chance the card is bad but it’s running fine until under load?
System runs fine with all four cards in but only the other 3 mining. Stable for 12+ hrs
I have the registry tweaks and a few other windows ten tips but any advice on stability is welcome too.
System runs fine with all four cards in but only the other 3 mining. Stable for 12+ hrs
I have the registry tweaks and a few other windows ten tips but any advice on stability is welcome too.
↧
hi--need claymore 10.5
hi mate..from where i can download claymore 10.5? tx
↧
Rig shutting down after few hours, worked great for months
I have a 13 GPU rig that has worked good for months now in my home office. Rig Specs:
7 x 1070 TI EVGA SC mining ZEC. CHIP OC 200 MHZ, MEMORY OC 700 MHZ
6 x RX580 SAPPHIRE NITRO+ 8GB mining ETH. BIOS mod.
2 x 1000W EVGA Gold rated PSU
2 x 750W EVGA Gold rated PSU
Asus Mining Expert MB w/ 512 SSD and 8 GB DDR4
Windows 10
I have two APC UPS backups connected to this rig. Each UPS is rated up to 865W. I have the PSUs paired in two groups with a 1000W + 750W powering the Nvidia cards and a 1000W + 750W powering the AMD cards. The Nvidia cards and system is using about 865 watts and the AMD cards are also using about 865 watts.
Earlier today I noticed the LED of the UPS powering the Nvidia cards come on and a timer below showing how many minutes were left indicating power loss. The minutes kept increasing and I realized the cards were not drawing as much power. I could not RDP into the rig and Claymore Manager confirmed that the AMD cards were also offline. The fans of the AMD cards were still spinning but the fans of the Nvidia cards stopped spinning. All case fans and CPU fans were spinning. After about a minute the rig shutdown on its own.
I turned the rig back on and it was able to mine again for about 2 hours before the same process repeated. I turned it on again and this time reduced the CHIP OC of the Nvidia cards to 150 MHZ and the memory down to 650 MHZ. However as mentioned above the rig was working fine for months with the higher overclocks. Reducing the values did not impact performance much with the ZEC miner so I might do this with my other rigs to reduce stress on the cards.
Another thing I did this time was disable ECO mode on all the power supplies (stabbing in the dark, not sure if that is the culprit). There is an ECO switch on each PSU. If it is set to on the PSU fan will not come on until the temperature of the PSU has reached I believe 55 C.
So far the system has been running fine for about 1/2 hour since these changes but only time will tell.
Anyone have an idea why the rig is displaying this behavior? I looked at System Events but really could not figure out what the reason was for the crash and eventual shutdown since a monitor is not hoked up to the system. Temperatures appear to be fine in the room and the cards are not running hot.
7 x 1070 TI EVGA SC mining ZEC. CHIP OC 200 MHZ, MEMORY OC 700 MHZ
6 x RX580 SAPPHIRE NITRO+ 8GB mining ETH. BIOS mod.
2 x 1000W EVGA Gold rated PSU
2 x 750W EVGA Gold rated PSU
Asus Mining Expert MB w/ 512 SSD and 8 GB DDR4
Windows 10
I have two APC UPS backups connected to this rig. Each UPS is rated up to 865W. I have the PSUs paired in two groups with a 1000W + 750W powering the Nvidia cards and a 1000W + 750W powering the AMD cards. The Nvidia cards and system is using about 865 watts and the AMD cards are also using about 865 watts.
Earlier today I noticed the LED of the UPS powering the Nvidia cards come on and a timer below showing how many minutes were left indicating power loss. The minutes kept increasing and I realized the cards were not drawing as much power. I could not RDP into the rig and Claymore Manager confirmed that the AMD cards were also offline. The fans of the AMD cards were still spinning but the fans of the Nvidia cards stopped spinning. All case fans and CPU fans were spinning. After about a minute the rig shutdown on its own.
I turned the rig back on and it was able to mine again for about 2 hours before the same process repeated. I turned it on again and this time reduced the CHIP OC of the Nvidia cards to 150 MHZ and the memory down to 650 MHZ. However as mentioned above the rig was working fine for months with the higher overclocks. Reducing the values did not impact performance much with the ZEC miner so I might do this with my other rigs to reduce stress on the cards.
Another thing I did this time was disable ECO mode on all the power supplies (stabbing in the dark, not sure if that is the culprit). There is an ECO switch on each PSU. If it is set to on the PSU fan will not come on until the temperature of the PSU has reached I believe 55 C.
So far the system has been running fine for about 1/2 hour since these changes but only time will tell.
Anyone have an idea why the rig is displaying this behavior? I looked at System Events but really could not figure out what the reason was for the crash and eventual shutdown since a monitor is not hoked up to the system. Temperatures appear to be fine in the room and the cards are not running hot.
↧
↧
monitoring software - Programa para monitoreo de Equipos Minero
Saludos, quería consultar que programas recomiendan para el el monitoreo de los equipos, su trabajo, estado, etc. Yo uso Claymore Dual miner y la versión Windows trae un programa minero, pero querí solicitar información de que otros programas pueden recomendar o por lo menos un tutorial.
Gracias.
Gracias.
↧
what GPU mining rigs is suitable ?
as we know ,ETH getting more attentions in global ,many miners are looking for suitable GPU mining rigs for ETH ,but always hesitated in choice ,China has rich graphic cards resource and always assembled finished GPU rigs with nice performance and good quality ,welcome to buy GPU rigs on akminer.com ,it is reputable miners online platform from China .
AKMiner Technology ( China )
AKMiner Technology ( China )
↧
Bricked my 480 cards with ATIFLASH... ERROR: 0FL01
Hey all. Tried flashing my XFX 480 8GB reference card and Gigabyte 480 8GB reference card with boysie's low power rom from this thread: https://forum.ethereum.org/discussion/9400/boysies-rx480-ref-bios-29mh-low-pwr-eth-or-dual-mining#latest
I backuped my roms with GPU-Z, then went into atiflash and ran:
atiflash.exe -f -p 1 low-pwr-29MH-Boysie
0 is a non-reference XFX 480 card, 1 and 2 are the reference cards.
I only flashed card #1 (which is the number 2 card on my motherboard, and it is the XFX 480 8GB card), rebooted, went and did atiflash -i and saw card #2 and #3 is bricked. I don't know how 2 cards managed to brick when I only ran the atiflash command on #1 card.
Tried unlocking the rom to flash my backup roms, no luck. Here's a screenshot:
![]()
I've tried flashing the bricked cards with my backup (xfx backup, but i still tried the gigabyte one but same results) and a bios that I got from techpowerup (https://www.techpowerup.com/vgabios/184552/xfx-rx480-8192-160614-1)
Any help in saving my cards, is appreciated.
edit: Interestingly enough, Device Manager still detects my cards, and I can still mine with these 3 cards. So my case is different from all the other bricked users I found on Google. Very strange.
I backuped my roms with GPU-Z, then went into atiflash and ran:
atiflash.exe -f -p 1 low-pwr-29MH-Boysie
0 is a non-reference XFX 480 card, 1 and 2 are the reference cards.
I only flashed card #1 (which is the number 2 card on my motherboard, and it is the XFX 480 8GB card), rebooted, went and did atiflash -i and saw card #2 and #3 is bricked. I don't know how 2 cards managed to brick when I only ran the atiflash command on #1 card.
Tried unlocking the rom to flash my backup roms, no luck. Here's a screenshot:
I've tried flashing the bricked cards with my backup (xfx backup, but i still tried the gigabyte one but same results) and a bios that I got from techpowerup (https://www.techpowerup.com/vgabios/184552/xfx-rx480-8192-160614-1)
Any help in saving my cards, is appreciated.
edit: Interestingly enough, Device Manager still detects my cards, and I can still mine with these 3 cards. So my case is different from all the other bricked users I found on Google. Very strange.
↧
Development cooperation the pool system in VietNam and Southeast Asia
At present we have regional advantage, in Vietnam there is no pool storage server, making it difficult for all regional investors if international transmission is interrupted because for some reason That, if you cooperate with us, we will be responsible for server and maintenance in Vietnam, optimize transmission lines, profit and attract more and more investors to exploit. In addition, if there are servers and systems operating in Vietnam, I believe that countries in the region such as Laos, Cambodia and Thailand will also benefit from the transmission line, attracting a lot of participants. into your system. We have had relationships with many people who have worked for many years and owned many machines to drop coins.
We believe that our capabilities and advantages will grow and help your system perform as well as possible.
If you would like to have a more detailed and detailed plan please reply to this email, we will discuss how it works, how it is developed and what is important.
Give me an appointment online via Skype, we will work together to reach a development agreement
Thanks for reading !
We believe that our capabilities and advantages will grow and help your system perform as well as possible.
If you would like to have a more detailed and detailed plan please reply to this email, we will discuss how it works, how it is developed and what is important.
Give me an appointment online via Skype, we will work together to reach a development agreement
Thanks for reading !
↧
↧
[ANN] DIG Coin - Pioneering the Future of Mining
What is DIG Coin and why is it unique and trustworthy?
DIG Coin was developed to reduce overall mining costs. This includes the costs of cloud mining contracts and cloud mining hardware. The monetary units raised through the DIG Coin ICO will fund the creation of a new globally competitive cloud mining company called Digital Excavators™.
By utilizing ICO proceeds for development of the first Digital Excavators™ cloud mining farm, we will be able to provide unprecedented rates to our customers. This in turn will trigger competition in the market driving global cost savings with other leading cloud mining vendors. The initial market value of DIG Coin will be guaranteed at $0.50 (or market value, if higher), and there will be an additional 20% discount on cloud mining contracts through Digital Excavators™ for those who have purchased the coin through our ICO.
DIG Coin DIG was created to provide reasonable rates for those engaging in cloud mining contracts. The creation of a fund to offer these unprecedented rates to cloud miners was put up by building digital excavators.
There are several ways from which users can make money by owning DIG Coin. One is through the platform’s lending program where an investor can earn passive income. To do so, one needs to purchase DIG Coins during the ICO or when they hit the exchange!
Want to learn more about DIG Coin? Visit their website here: https://www.digcoin.co/default.aspx
DIG Coin was developed to reduce overall mining costs. This includes the costs of cloud mining contracts and cloud mining hardware. The monetary units raised through the DIG Coin ICO will fund the creation of a new globally competitive cloud mining company called Digital Excavators™.
By utilizing ICO proceeds for development of the first Digital Excavators™ cloud mining farm, we will be able to provide unprecedented rates to our customers. This in turn will trigger competition in the market driving global cost savings with other leading cloud mining vendors. The initial market value of DIG Coin will be guaranteed at $0.50 (or market value, if higher), and there will be an additional 20% discount on cloud mining contracts through Digital Excavators™ for those who have purchased the coin through our ICO.
DIG Coin DIG was created to provide reasonable rates for those engaging in cloud mining contracts. The creation of a fund to offer these unprecedented rates to cloud miners was put up by building digital excavators.
There are several ways from which users can make money by owning DIG Coin. One is through the platform’s lending program where an investor can earn passive income. To do so, one needs to purchase DIG Coins during the ICO or when they hit the exchange!
Want to learn more about DIG Coin? Visit their website here: https://www.digcoin.co/default.aspx
↧
Claymore DevFee couldn't connect to stratum, restarts miner, complains not enough GPU memory DAG
Claymore 11.0 on Linux
I have:
2x Sapphire Nitro+ AMDGPU Pro RX580 4GB
1x ASUS Nvidia GeForce GTX 1070 8GB
Mining with Claymore 11.0 is working fine .. but every now and then .. when the DevFee thread is started ... sometimes ( not all the time ), the thread for the DevFee could not connect to the mining pool ( e.g. asia1.ethermine.org ).
This causes Claymore to forcibly restart the whole thing, and then complains of "not enough GPU memory to place DAG," on the two RX580 4GB .. which, I believe is a bug in the Claymore miner ... because it started fine in the first place with those 3 GPUs. Of course, if I hit Ctrl-C, and then start it again from the command-line, everything is fine.
So what I think is happening ( just a guess ), is that, when it decided to restart ,it did not clear the memory that it was using in the GPU so that it is allocating twice the amount already, exceeding the 4GB of the GPU.
I repeat, this only happens when either of the following is true:
1) DevFee thread could not connect to the pool .. OR ..
2) Non-DevFee thread lost connection to the mining pool
and in both cases, Claymore 11.0 restarts ( without clearing the currently allocated memory in the GPU ... which is my guess ).
Anyone else with 4GB GPUs experiencing this when connection is lost / DevFee thread could not connect ?
I have:
2x Sapphire Nitro+ AMDGPU Pro RX580 4GB
1x ASUS Nvidia GeForce GTX 1070 8GB
Mining with Claymore 11.0 is working fine .. but every now and then .. when the DevFee thread is started ... sometimes ( not all the time ), the thread for the DevFee could not connect to the mining pool ( e.g. asia1.ethermine.org ).
This causes Claymore to forcibly restart the whole thing, and then complains of "not enough GPU memory to place DAG," on the two RX580 4GB .. which, I believe is a bug in the Claymore miner ... because it started fine in the first place with those 3 GPUs. Of course, if I hit Ctrl-C, and then start it again from the command-line, everything is fine.
So what I think is happening ( just a guess ), is that, when it decided to restart ,it did not clear the memory that it was using in the GPU so that it is allocating twice the amount already, exceeding the 4GB of the GPU.
I repeat, this only happens when either of the following is true:
1) DevFee thread could not connect to the pool .. OR ..
2) Non-DevFee thread lost connection to the mining pool
and in both cases, Claymore 11.0 restarts ( without clearing the currently allocated memory in the GPU ... which is my guess ).
Anyone else with 4GB GPUs experiencing this when connection is lost / DevFee thread could not connect ?
↧
MSI Rx 570 gaming x 4gb BIOS request
I'm looking for the original or modded BIOS for the MSI Rx 570 gaming x 4gb card. I'm trying to do some tests on this card, if someone has the bios for this card please post it here.
Thanks.
Thanks.
↧