Quantcast
Channel: Mining — Ethereum Community Forum
Viewing all 10806 articles
Browse latest View live
↧

Miner freeze ( GPU 2: got incorrect temperature 511, ignore)

August 16, 2018, 4:14 am
$
0
0
Hey everybody, my miner working well before i left to holidays, and now i'm back, miner freeze every time with the same message as in title, this message happen always for gpu 1 and 2 and not my other (i have 4 rx 480 and 1rx 580, gpu1 and 2 are rx 480)
i try to change risers for 1 and 2 but it's same, i dont really think it's psu or motherboard or cpu. i,give you all the log file after this for you to see the problem.


20:08:25:101 143c Check and remove old log files...
20:08:25:116 143c args: -epool eu1.ethermine.org:4444 -ewal 0x86100F5504755CAeb4Ac0590860159607b4Fd539.nicoeth -epsw x -r 0 -tstop 65,65,65,65,65
20:08:25:116 143c
20:08:25:132 143c ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
20:08:25:147 143c º Claymore's Dual GPU Miner - v11.9 º
20:08:25:147 143c º ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK º
20:08:25:163 143c ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
20:08:25:163 143c
20:08:25:179 143c b597
20:08:25:413 143c ETH: 1 pool is specified
20:08:25:429 143c Main Ethereum pool is eu1.ethermine.org:4444
20:08:25:429 143c DCR: 0 pool is specified
20:08:26:179 143c OpenCL platform: AMD Accelerated Parallel Processing
20:08:26:194 143c OpenCL initializing...

20:08:26:194 143c AMD Cards available: 5
20:08:26:210 143c GPU #0: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 1:0:0)
20:08:26:210 143c GPU #0 recognized as Radeon RX 480/580
20:08:26:210 143c GPU #1: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 2:0:0)
20:08:26:226 143c GPU #1 recognized as Radeon RX 480/580
20:08:26:226 143c GPU #2: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 3:0:0)
20:08:26:226 143c GPU #2 recognized as Radeon RX 480/580
20:08:26:241 143c GPU #3: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 4:0:0)
20:08:26:241 143c GPU #3 recognized as Radeon RX 480/580
20:08:26:257 143c GPU #4: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 5:0:0)
20:08:26:257 143c GPU #4 recognized as Radeon RX 480/580
20:08:26:257 143c POOL/SOLO version
20:08:26:257 143c Platform: Windows
20:08:27:147 143c start building OpenCL program for GPU 0...
20:08:27:851 143c done
20:08:28:085 143c start building OpenCL program for GPU 1...
20:08:28:507 143c done
20:08:28:741 143c start building OpenCL program for GPU 2...
20:08:29:148 143c done
20:08:29:382 143c start building OpenCL program for GPU 3...
20:08:29:788 143c done
20:08:30:007 143c start building OpenCL program for GPU 4...
20:08:30:398 143c done
20:08:30:710 143c GPU #0: algorithm ASM 1
20:08:30:757 143c GPU #1: algorithm ASM 1
20:08:30:819 143c GPU #2: algorithm ASM 1
20:08:30:882 143c GPU #3: algorithm ASM 1
20:08:30:929 143c GPU #4: algorithm ASM 1
20:08:30:929 143c cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
20:08:30:944 143c No NVIDIA CUDA GPUs detected.
20:08:30:944 143c Total cards: 5
20:08:30:944 143c No NVIDIA cards in the list, NVML library will not be used.
20:08:32:773 143c SSL: Imported 31 certificates from local storage
20:08:32:820 304 ETH: Stratum - connecting to 'eu1.ethermine.org' <35.234.119.196> port 4444 (unsecure)
20:08:32:882 304 sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x86100F5504755CAeb4Ac0590860159607b4Fd539.nicoeth", "x"], "id": 2, "method": "eth_submitLogin"}

20:08:32:898 304 ETH: Stratum - Connected (eu1.ethermine.org:4444) (unsecure)
20:08:32:898 143c No pool specified for Decred! Ethereum-only mining mode is enabled

20:08:32:913 143c ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

20:08:32:929 143c ETH: eth-proxy stratum mode
20:08:32:929 143c Watchdog enabled
20:08:32:945 143c Remote management (READ-ONLY MODE) is enabled on port 3333
20:08:32:945 304 buf: {"id":2,"jsonrpc":"2.0","result":true}

20:08:32:945 304 ETH: Authorized
20:08:32:945 304 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

20:08:32:945 143c

20:08:32:960 143c You did not specify -dcri values directly, so they will be detected automatically
20:08:32:960 143c Automatic detection of best -dcri values started, please wait...

20:08:33:007 304 buf: {"id":3,"jsonrpc":"2.0","result":["0xc03be8cf8ff78c43581b83bbe3e197fd1e737a78197f8bfd537020ca40967330","0x1aef3e83f99bae13313f5e70bb3ee12078c8d78b7f31d83af211b7612d47eb12","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5de43d"]}

20:08:33:132 d24 Setting DAG epoch #205...
20:08:36:054 2cc Setting DAG epoch #205 for GPU4
20:08:36:054 9f4 Setting DAG epoch #205 for GPU0
20:08:36:054 d24 Setting DAG epoch #205 for GPU2
20:08:36:054 a40 Setting DAG epoch #205 for GPU3
20:08:36:054 2cc Create GPU buffer for GPU4
20:08:36:054 9f4 Create GPU buffer for GPU0
20:08:36:085 d24 Create GPU buffer for GPU2
20:08:36:070 a40 Create GPU buffer for GPU3
20:08:36:101 db0 Setting DAG epoch #205 for GPU1
20:08:36:101 db0 Create GPU buffer for GPU1
20:08:37:179 304 buf: {"id":0,"jsonrpc":"2.0","result":["0x61adb5516d28d780a7a997694a82bf5582c2f6633e34cb84c42201a982637681","0x1aef3e83f99bae13313f5e70bb3ee12078c8d78b7f31d83af211b7612d47eb12","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5de43e"]}

20:08:37:179 304 ETH: 08/15/18-20:08:37 - New job from eu1.ethermine.org:4444
20:08:37:195 304 target: 0x0000000112e0be82 (diff: 4000MH), epoch 205(2.60GB)
20:08:37:210 304 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
20:08:37:210 304 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
20:08:43:008 9f4 GPU0 DAG creation time - 6812 ms
20:08:43:023 304 ETH: checking pool connection...
20:08:43:023 304 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

20:08:43:023 d24 GPU2 DAG creation time - 6791 ms
20:08:43:023 9f4 Setting DAG epoch #205 for GPU0 done
20:08:43:039 d24 Setting DAG epoch #205 for GPU2 done
20:08:43:054 2cc GPU4 DAG creation time - 6844 ms
20:08:43:070 2cc Setting DAG epoch #205 for GPU4 done
20:08:43:101 304 buf: {"id":3,"jsonrpc":"2.0","result":["0x61adb5516d28d780a7a997694a82bf5582c2f6633e34cb84c42201a982637681","0x1aef3e83f99bae13313f5e70bb3ee12078c8d78b7f31d83af211b7612d47eb12","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5de43e"]}

20:08:43:148 a40 GPU3 DAG creation time - 6891 ms
20:08:43:148 a40 Setting DAG epoch #205 for GPU3 done
20:08:43:195 db0 GPU1 DAG creation time - 6946 ms
20:08:43:211 db0 Setting DAG epoch #205 for GPU1 done
20:08:52:180 17e8 GPU 1: got incorrect temperature 511, ignore
20:08:52:289 17e8 GPU 2: got incorrect temperature 511, ignore
20:08:53:024 304 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x76298fc", "0x00000000000000000000000000000000000000000000000000000000fa15ed62"]}

20:08:53:039 304 ETH: checking pool connection...
20:08:53:039 304 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

20:08:53:070 304 buf: {"id":6,"jsonrpc":"2.0","result":true}

20:08:53:117 304 buf: {"id":3,"jsonrpc":"2.0","result":["0x61adb5516d28d780a7a997694a82bf5582c2f6633e34cb84c42201a982637681","0x1aef3e83f99bae13313f5e70bb3ee12078c8d78b7f31d83af211b7612d47eb12","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5de43e"]}

20:08:55:305 17e8 GPU 1: got incorrect temperature 511, ignore
20:08:55:410 17e8 GPU 2: got incorrect temperature 511, ignore
20:08:55:446 2cc gd 4.62
20:08:55:492 9f4 gd 0.62
20:08:55:539 a40 gd 3.62
20:08:58:258 1670 GPU #0: apply best detected -dcri value: 32
20:08:58:258 1670 em hbt: 0, fm hbt: 0,
20:08:58:274 1670 watchdog - thread 0 (gpu0), hb time 78
20:08:58:289 1670 watchdog - thread 1 (gpu0), hb time 484
20:08:58:305 1670 watchdog - thread 2 (gpu1), hb time 9672
20:08:58:305 1670 watchdog - thread 3 (gpu1), hb time 9297
20:08:58:305 1670 watchdog - thread 4 (gpu2), hb time 9453
20:08:58:321 1670 watchdog - thread 5 (gpu2), hb time 9093
20:08:58:321 1670 watchdog - thread 6 (gpu3), hb time 468
20:08:58:321 1670 watchdog - thread 7 (gpu3), hb time 78
20:08:58:321 1670 watchdog - thread 8 (gpu4), hb time 172
20:08:58:336 1670 watchdog - thread 9 (gpu4), hb time 563
20:08:58:430 17e8 GPU 1: got incorrect temperature 511, ignore
20:08:58:541 17e8 GPU 2: got incorrect temperature 511, ignore
20:08:58:541 17e8 GPU 1: got incorrect temperature 511, ignore
20:08:58:641 17e8 GPU 2: got incorrect temperature 511, ignore
20:08:58:641 17e8 GPU0 t=55C fan=26%, GPU1 t=0C fan=0%, GPU2 t=0C fan=0%, GPU3 t=61C fan=23%, GPU4 t=58C fan=22%
20:09:01:665 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:01:772 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:03:055 304 ETH: checking pool connection...
20:09:03:055 304 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

20:09:03:118 304 buf: {"id":3,"jsonrpc":"2.0","result":["0x61adb5516d28d780a7a997694a82bf5582c2f6633e34cb84c42201a982637681","0x1aef3e83f99bae13313f5e70bb3ee12078c8d78b7f31d83af211b7612d47eb12","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5de43e"]}

20:09:04:790 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:04:903 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:07:915 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:08:024 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:11:040 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:11:145 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:13:040 304 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x46fa698", "0x00000000000000000000000000000000000000000000000000000000fa15ed62"]}

20:09:13:087 304 buf: {"id":6,"jsonrpc":"2.0","result":true}

20:09:13:087 304 ETH: checking pool connection...
20:09:13:087 304 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

20:09:13:149 304 buf: {"id":3,"jsonrpc":"2.0","result":["0x61adb5516d28d780a7a997694a82bf5582c2f6633e34cb84c42201a982637681","0x1aef3e83f99bae13313f5e70bb3ee12078c8d78b7f31d83af211b7612d47eb12","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5de43e"]}

20:09:14:165 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:14:275 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:17:290 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:17:396 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:17:400 17e8 GPU #3 reached STOP temperature (65 >= 65), stop mining on this GPU.
20:09:20:415 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:20:527 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:23:119 304 ETH: checking pool connection...
20:09:23:119 304 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

20:09:23:181 304 buf: {"id":3,"jsonrpc":"2.0","result":["0x61adb5516d28d780a7a997694a82bf5582c2f6633e34cb84c42201a982637681","0x1aef3e83f99bae13313f5e70bb3ee12078c8d78b7f31d83af211b7612d47eb12","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x5de43e"]}

20:09:23:540 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:23:648 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:26:666 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:26:779 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:29:791 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:29:900 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:29:900 17e8 GPU 1: got incorrect temperature 511, ignore
20:09:30:000 17e8 GPU 2: got incorrect temperature 511, ignore
20:09:30:000 17e8 GPU0 t=59C fan=31%, GPU1 t=0C fan=0%, GPU2 t=0C fan=0%, GPU3 t=52C fan=24%, GPU4 t=63C fan=27%
20:09:30:197 16ec Quit...
20:09:30:213 8c8 GPU 1: got incorrect temperature 511, ignore
20:09:30:270 1670 em hbt: 78, fm hbt: 140,
20:09:30:320 1670 watchdog - thread 0 (gpu0), hb time 843
20:09:30:322 1670 watchdog - thread 1 (gpu0), hb time 422
20:09:30:322 1670 watchdog - thread 2 (gpu1), hb time 41687
20:09:30:322 1670 watchdog - thread 3 (gpu1), hb time 41312
20:09:30:322 1670 watchdog - thread 4 (gpu2), hb time 41468
20:09:30:338 1670 watchdog - thread 5 (gpu2), hb time 41109
20:09:30:338 1670 watchdog - thread 6 (gpu3), hb time 234
20:09:30:338 1670 watchdog - thread 7 (gpu3), hb time 234
20:09:30:353 1670 watchdog - thread 8 (gpu4), hb time 454
20:09:30:353 1670 watchdog - thread 9 (gpu4), hb time 875
20:09:30:320 8c8 GPU 2: got incorrect temperature 511, ignore
20:09:30:478 8c8 Quit, please wait...

↧
Search

GPU slot issue

August 17, 2018, 8:40 am
$
0
0
I have 6 GPUs Aorus 570 4GB and Asrock 81 PRO BTC motherboard, 1200W Evga PSU...
I have SLOTS 0-5 and 6 GPUs installed in rig, but what ever I put in SLOT 1 (longest slot near to CPU and GPU with HDMI OUT) I have few seconds after start showing temperature on that slot between 85-90C (real temp measured with infrared thermometer is like any other GPU in rig around 50C) and hashrate starts falling from 29 MHs to 12 MHs and after few minutes to 0. I tried to switch couple GPUs and risers and I have always same result. When I put any card in SLOT 1 it will do what I described above. If I put card to any other slot GPU works like a charm. SO IT'S NOT GPU or RISERS problem...

Tried on both Windows and Ethos. Tried different overclocking underclocking. Nothing helps...

Any idea what causes this issue? Motherboard? Any settings to change?

Thank you!
↧
↧

Best Proxy to Use ?

July 25, 2018, 6:18 pm
$
0
0
What is the recommended best proxy to use ? I have seen "sammy's" and "Dwarfpools" proxy servers, and a few others. Is there anything that is newer/updated? Most of them are from 2016, which is fine if there is no need for improvement I guess.. any suggestions appreciated.
↧

Which Graphics Card? 480/570/580

June 1, 2017, 8:57 am
$
0
0
Im going to be buying 2 graphics cards soon for mining Ethereum which one should I get?
Asus (DUAL-RX480-O4G) $340 each
MSI Gaming X Radeon RX570 4GB $320 each
Gigabyte Radeon RX580 Gaming 4GB $340 each

Which would most likely be best ROI at stock and with modding?


Edit:
Also does Brand matter?
I chose the 480 as it is the only one I can get my hands on so can't change that.
But the MSI 570 I read online was good but I could get an Asus Expedition OC RX570 4gb or a Gigabyte Gaming Radeon RX570 4gb both for $20 cheaper
as for the 580 I can also get a Gigabyte AORUS RX580 for the same price, but for $50 more I can get the 8GB one, and I notice the 8GB has memory speed of 1000Mhz than the 4Gb so would it be worth it?

Also what are your thoughts on second hand graphics cards?
Thanks
↧

Heat

August 18, 2018, 7:40 am
$
0
0
Whats people do for getting the heat out of your home from mining ? its difficult to keep the heat down even with a 6 card machine so whats people using to get heat down with a more substantial setup ?
↧
↧

GPU Mining is out, come and let us know of your bench scores!

May 14, 2015, 7:23 am
$
0
0
**This thread is for benchmark results only - post questions in other threads**

Geth GPU support is coming soon, in the meantime, the C++ miner is out.
The purpose of this thread is to post GPU results, not CPU.

First, install the client:
https://github.com/ethereum/cpp-ethereum/wiki/Installing-clients

Second, run eth -M -G
Of course, you'll need a GPU for this to work. Use --opencl-device 0 if Eth is not identifying your OCL device properly

Third, post your results!

The format is:

OS / OS version / GPU / Eth Version
min / mean / max: xx / xx / xx
Inner mean: xx.xxxx MH

Please post everything in MH.
Please do not post questions etc as they will be removed.


Update:
14/05/15 - corrected typo on opencl, clarified thread rules
↧

Asic Mining Hardware

August 19, 2018, 12:34 am
$
0
0
Innosilicon Equihash A9 ZMaster 1+1 Free $5,111.00

Bitmain Antminer Z9 mini $701.00

Innosilicon A5+ DashMaster $1,512.00

Innosilicon A6 LTCMaster $2,777.00

Innosilicon A8 CryptoMaster $799.00

Innosilicon T2 Turbo(T2T) Miner $1,199.00

Innosilicon A8+ CryptoMaster $1,399.00

Why www.Z-cash-mining.com?

We make our clients successful by designing and deploying miners and supporting IT equipment that is anti-fragile and robust enough to perform for years. Z-cash-mining.com uses data centers in NY, Los Angeles, and Nevada to host our mining rigs, and we will be expanding soon in order to help our clients achieve the lowest cost per kWh in the country
Based in Erie, New York, CRYPTO MINING EQUIPMENT LLC is poised to become the largest cryptocurrency mining center in the United States of America. Led by a group of successful business and cryptocurrency investors, CRYPTO MINING EQUIPMENT LLC leverages the latest mining technology and innovative partnerships to maximize returns for its investors.
Mission

CRYPTO MINING EQUIPMENT LLC mission is to build and operate a next-generation Zcash and cryptocurrency mining center. Through strategic partnerships and a skilled management team, CRYPTO MINING EQUIPMENT LLC will work towards its goal of becoming the largest bitcoin mining operation in the United States of America

CRYPTO MINING EQUIPMENT LLC was founded in 2017 by a group of entrepreneurs with a penchant for the luxury lifestyle. Funded by a group of technology investors and backed up by a talented team of web developers and members of the crypto community. Our team has got the resources and expertise to source quality and reliable suppliers that ensure a prompt and safe delivery to your address. We believe in a customer-centric approach to business. We pride ourselves on our excellent customer service and communication with our clients.


↧

Start Mining With Stable Mining Platform-regalminer.com

August 19, 2018, 11:12 pm
$
0
0
Note: I'm not admin or owner of this project. All information is taken from the project website.
About Us:-
You can make your dreams true with us. You can start mining without purchase any heavy mining hardware. First of all, you need to create an account on our website to go to your dashboard where you can manage your deposits and withdraws. Just register with us. Please choose your suitable plan and make the payment. After that, you to do is sit back, relax and watch the Bitcoins & Etheriums come in your account. You can withdraw your earning at anytime automatically and you can make your dreams true and enjoy the life with your good income.

Investment Plans:

- Profit 1% Daily For 180 days
Mining Power 250 GH/s
Start From: B 0.0000052

- Profit 2% Daily For 180 days
Mining Power 1000 GH/s
Start From: B 0.000013

- Profit 3% Daily For 180 days
Mining Power 2000 GH/s
Start From: B 0.000063

Payment Accepted:
- Bitcoin
- Ethereum

Program Features:

- 256-Bit SSL Certificated
- Instant Withdrawal

Join Program: https://regalminer.com/
↧
Search

GPUBay.com - Computer Bay Adapters for Graphics Cards

August 21, 2018, 8:52 am
$
0
0
We have developed a bracket which allows your unused computer bays, usually for DVD ROM drives, to be used by graphics cards. We have just started selling these brackets after a year of development and testing. I know most miners just have frame rigs, but these brackets are for people that want to make rigs more portable, have kids or pets, or want to use a miner in an office.

https://gpubay.com

If you are interested in buying , you can use crypto or paypal. If you are outside the US, just send an email for the shipping cost.

let me know what you think about the idea...
↧
↧

Will withdrawals increase the market?

August 22, 2018, 5:15 am
$
0
0
Should we put our money in the exchange or in our own purse?

I think everyone has their own opinion, and old users will take money into their wallets.

But novices don't always know how to do this. They only buy and sell COINS on large platforms.


Just last September, when China said it was closing down its trading platform, everyone started selling COINS and withdrawals, and there was basically no currency on the platform. Currency prices have soared in more than a month.

Does the mention of money in one's purse have anything to do with the ups and downs of the market?
↧

Start Mining With Intermining-intermining.io

August 22, 2018, 5:27 am
$
0
0
Note: I'm not admin or owner of this project. All information is taken from the project website.

Start today and earn money with our profitable cloud mining services

Investment Plans:

- Daily Profit 0.7% For 1 Years
Mining Power 5 TH/s
Start From: BTC 0.01 per TH/s

- Daily Profit 0.6% For 2 Years
Mining Power 3 TH/s
Start From: BTC 0.02 per TH/s

- Daily Profit 0.5% For 3 Years
Mining Power 1 TH/s
Start From: BTC 0.03 per TH/s

Payment Accepted:
- Bitcoin
- Ethereum
- Litecoin

Program Features:

- 256-Bit SSL Certificated
- Instant Withdrawal

Join Program: https://www.intermining.io/
↧

An idea for a new coin - Retrieving wallets

August 22, 2018, 8:42 am
$
0
0
Ok I'm no whizzkid, but I can bet you there are people reading this that are.

What is someone created an ICo that could help people recover lost wallets having recently lost mine I would gladly give 10% of it's value to be retrieved, now if there was a way you could work with the wallet owner to retrieve the wallet for say 10% of it's value, I reckon that would be a good ICO, as basically you're safeguarding people's money.

What are people's thoughts on this idea, or is it dead before pen even hits the paper?
↧

Server PSU breakout board / 6 pin SATA/Molex connectors

July 6, 2018, 8:14 pm
$
0
0
I'm converting one of my mining rigs from ATX PSU to a server PSU powered one.


My situation is, I have a modular Corsair HX1000i that is not working anymore and now I have spare SATA/Molex with Type-3 / 6-pin connector.

I purchased one of those HP 1200w server PSU with the breakout board which supports 6-pin PCIE connectors.



My problem is, I do not have 6-pin powered risers. What I only have are SATA and Molex powered risers.

My question is, can I plug one of those SATA/Molex cables that's left by my Corsair HX1000i to the server PSU breakout board?
They seem to plug in fine but I'm not so sure about the voltages of every pins. I do not want to start fireworks inside my house so if anyone of you has tried this please do tell if it works.







Thanks in advance.
↧
↧

where to find tokens entering exchanhes

August 22, 2018, 10:15 am
$
0
0
Hi all,

I would like to ask if you know of a way to get informed of the ico tokens which are entering exchanges?

One way of course is to follow the ico website,telegram e.t.c. but i am lokking for a more centralized way which include them all e.g. a website or similar.

Because it is not so easy to watch every ico out there indepedently everyday.

Thank you for your time reading this.

Regards.
↧

Maximize Your Profitability With Stable Mining Platform-regalminer.com

August 23, 2018, 1:13 am
$
0
0

Note: I'm not admin or owner of this project. All information is taken from the project website.

Don't waste your time on fake websites. You can make your dreams true with us. Start Mining Instantly with a Stable Mining Platform Regal Miner. You can start mining without purchase any heavy mining hardware. Lesser the investment higher the profit. Just invest with us.

You can choose your suitable plan and make the payment.

Investment Plans:

- Profit 1% Daily For 180 days
Mining Power 250 GH/s
Start From: B 0.0000052

- Profit 2% Daily For 180 days
Mining Power 1000 GH/s
Start From: B 0.000013

- Profit 3% Daily For 180 days
Mining Power 2000 GH/s
Start From: B 0.000063

Payment Accepted:
- Bitcoin
- Ethereum

Program Features:

- 256-Bit SSL Certificated
- Instant Withdrawal

Join Program: https://regalminer.com/
↧
Search

Google has been charged in Russia.

August 23, 2018, 12:51 pm
$
0
0
Google has been sued in Russia after the company announced restrictions on the use of encrypted currency advertising. Entrepreneur vladimir o 'rehov has asked Russia's Google to pay 2 billion rubles. He claims the ban deprives him of investing in cryptocurrency projects and finding investors to fund his business plans.
↧

Hello for Dcr 0 pool is specified

August 5, 2018, 1:04 am
$
0
0
Hello everybody,
I nées help for error. (Dcr 0 pool is specified )

For nano pool and claymore.

I am very good for upgrade and optimise hardware but noir but notre for programmation

Thx for your help
↧
↧

what now ? miners in hand no location ?

August 26, 2018, 10:29 pm
$
0
0
12 antminer s9 and 5 l3 in hand and there is no location.
we will see a lot of people in same boat like this after shipments from bitmain.
what to do now
renting a place get it ready at least 1 month and cost of expensive electricity
less then 100 miners not worth it
option 2 sell it on craiglis ?
any idea or location to colo miners
↧

Mining projects are real or not?

August 27, 2018, 2:24 am
$
0
0
Hello Friends,
I am new here, So I don't know I should post a new discussion or reply to existing one(if any). These days, the daily new mining project launch. I just want to know how we can rectify that, the project is real or fake. I heard about http://regalminer.com/ . should I invest in this or not? my some known person saying that this is good and you can invest in this although they already did.

Please help me friends
↧

Ubit Riser - Any good ?

August 27, 2018, 4:14 pm
↧
Viewing all 10806 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>