Has anyone tried adding a PPTP VPN to their ETHOS distribution? I installed network-manger and also setup multiple connections but am getting an error with managing the the VPN. I didnt know if anyone else had a solution to this or attempted it. Any pointers or write ups that I could experiment with would be appreciated.
↧
Adding Auto VPN PPTP support to ETHOS 1.3.1
↧
30 cards, 4 MOBO, raisers, PSU, Ram for sale. PM me for more info.
RX 480 8GB, low power consumption, running at 68 to 70 degrees, Fans at 50%, when i stop mining were hashing 30 to 31, I have 8 of these ($320 Canadian$ each) make an offer
RX 470 8GB (reference), low power consumption, running at 60 to 65 degrees, Fans at 30%, when i stop mining were hashing 27 to 28, I have 12 of these ($450 Canadian$ each) make an offer
RX 580 8GB, low power consumption, running at 57 to 63 degrees, Fans at 30%, when i stop mining were hashing 30 to 31, I have 10 of these ($500 Canadian$ each) make an offer
have MOBO, Ram and PSU if also interested in those, I'm in Canada but could ship worldwide.
PM me for more info, only payment taken will be Paypal.
RX 470 8GB (reference), low power consumption, running at 60 to 65 degrees, Fans at 30%, when i stop mining were hashing 27 to 28, I have 12 of these ($450 Canadian$ each) make an offer
RX 580 8GB, low power consumption, running at 57 to 63 degrees, Fans at 30%, when i stop mining were hashing 30 to 31, I have 10 of these ($500 Canadian$ each) make an offer
have MOBO, Ram and PSU if also interested in those, I'm in Canada but could ship worldwide.
PM me for more info, only payment taken will be Paypal.
↧
↧
SRBPolaris V3.5 - BIOS editor for AMD RX4XX and RX5XX cards
SRBPolaris BIOS EDITOR
BIOS editor for AMD RX 460/470/480, RX 550/560/570/580 video cards
- Pimp my straps - speed up your factory bios with custom straps
- Copy memory straps fast and easy
- Memory timing strap editor - make your own custom straps
- Unlock RX460 additional shaders
- Set default GPU and MEM clocks
- Set GPU voltage
- Lot's of useful stuff
Latest ver. : SRBPolaris BIOS EDITOR V3.5
Download from here : SRBPolaris_V3.5
- Pimp my straps - give wings to your factory bios
- Added power control limit
- Added fan mode selection
- Med-High temp and PWM is now editable
- Added fan sensitivity and acoustic limit
- Bug fixes
Download SRBPolaris BIOS EDITOR V3.4 from here : SRBPolaris_V3.4
BIOS editor for AMD RX 460/470/480, RX 550/560/570/580 video cards
- Pimp my straps - speed up your factory bios with custom straps
- Copy memory straps fast and easy
- Memory timing strap editor - make your own custom straps
- Unlock RX460 additional shaders
- Set default GPU and MEM clocks
- Set GPU voltage
- Lot's of useful stuff
Latest ver. : SRBPolaris BIOS EDITOR V3.5
Download from here : SRBPolaris_V3.5
- Pimp my straps - give wings to your factory bios
- Added power control limit
- Added fan mode selection
- Med-High temp and PWM is now editable
- Added fan sensitivity and acoustic limit
- Bug fixes
Download SRBPolaris BIOS EDITOR V3.4 from here : SRBPolaris_V3.4
↧
Gforce GTX 970 strix problem, very low hasrate(tryed everything what i could find)
Hello everyone.
I recently build myself a rig with 3 GTX 970 strix 4GB OC (https://www.amazon.com/GeForce-Overclocked-256-bit-DisplayPort-Graphics/dp/B00NJ9BJ8G)
I am currently running Win7 64bit. The miners are working with both claymore and Genoil, the problem is i get a very low hashrate.
I the the 347 driver and the 361 driver, same result for both around 3-4 MH/s for each card.
I have tried every forum tread i could find on this topping, setting it to P0 state was impossible since i get N/A when i try to get the clock list (read its some nvidia bug will try to fix it later).
For the moment i am trying to figure out what the problem is.
Here are the .bat file codes i am trying to run.(My wallet address is is changed so no problem there )
For claymore:
(Miners i tryed are Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.2 , and v9.6)
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal My Wallet Address
Genoil: (OpenCPL)
ethminer.exe -G -F http://eth-eu.dwarfpool.com:80/My Wallet Address
I am welcome to any suggestion at the moment, i tried with MSI afterburner to get some more out of it but nothing.
Here are some screenshots of Nvidia Inspector for each card (i have no idear why they run in P2 state tryed to set it to P0 no luck till now)
![]()
![]()
![]()
Here is my Hashrate (ethminer-0.9.41-genoil-1.1.6-pre > Ethermine-Stratum-CUDA)
![]()
I recently build myself a rig with 3 GTX 970 strix 4GB OC (https://www.amazon.com/GeForce-Overclocked-256-bit-DisplayPort-Graphics/dp/B00NJ9BJ8G)
I am currently running Win7 64bit. The miners are working with both claymore and Genoil, the problem is i get a very low hashrate.
I the the 347 driver and the 361 driver, same result for both around 3-4 MH/s for each card.
I have tried every forum tread i could find on this topping, setting it to P0 state was impossible since i get N/A when i try to get the clock list (read its some nvidia bug will try to fix it later).
For the moment i am trying to figure out what the problem is.
Here are the .bat file codes i am trying to run.(My wallet address is is changed so no problem there )
For claymore:
(Miners i tryed are Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.2 , and v9.6)
EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal My Wallet Address
Genoil: (OpenCPL)
ethminer.exe -G -F http://eth-eu.dwarfpool.com:80/My Wallet Address
I am welcome to any suggestion at the moment, i tried with MSI afterburner to get some more out of it but nothing.
Here are some screenshots of Nvidia Inspector for each card (i have no idear why they run in P2 state tryed to set it to P0 no luck till now)
Here is my Hashrate (ethminer-0.9.41-genoil-1.1.6-pre > Ethermine-Stratum-CUDA)
↧
SRBMiner Cryptonight AMD GPU Miner
Cryptonight, Cryptonight Lite, Cryptonight Heavy and Cryptonight Ipbc
Download only from this link, it's the only official link
ATTENTION:
From V1.4.0 the miner uses a separate pools.txt file, where you define your pools, wallet, etc.
Config from older versions that includes pool related data, won't be used!
Supports:
- Cryptonight
- Cryptonight V7
- Cryptonight Lite
- Cryptonight Lite V7
- Cryptonight Heavy
- Cryptonight Ipbc
Supports Nicehash, Nicehash V7 & SSL/TLS encrypted connections
For best results use Blockchain compute drivers (Get it from here) or Radeon Adrenalin 17 or newer drivers.
ADL tested & working with Radeon Software Crimson ReLive Edition Beta for Blockchain Compute Driver Version 17.30.1029
What can this miner offer you beside usual mining functionalities:
DevFee:
- Low DevFee (0.85%) -> every ~2 hours 1 minute mining for the dev
- Non-agressive DevFee mining -> if miner can't connect to DevFee pool, no problem, switching back to user pool ASAP
- 3 locations for DevFee pool : europe, asia, usa
Performance:
- Only one parameter you have to play with : intensity (0 - 300)
- Leave intensity on 0, and miner will try to set a minimum start intensity automatically
- To get even better results, there is an option to use double threads
Extra:
- Watchdog that monitors your GPU threads, if they stop working, miner exists, and restart script takes over and well.. restarts mining Smiley
- Set the target temperature you want, and miner will set fan speed according to that
Tips:
- If you leave intensity on 0 it will play safe, so in many cases you can increase that value to get better results
- For better results set double_threads to true, and leave intensity on 0
- If you get an error that says it can't create scratchpad buffer, you have to lower intensity
- Largest intensity setting won't always give you the best hashrate. Experiment and find the best setting for your GPU.
How to set it up ?
The config file :
"cryptonight_type" : "NORMAL, NORMALV7, LITE, LITEV7, HEAVY OR IPBC"
"intensity" : A NUMBER BETWEEN 0-300,
"double_threads" : TRUE OR FALSE,
"target_temperature" : A NUMBER BETWEEN 0-99
Optional parameters :
"giveup_limit" : HOW MANY TIMES TO TRY CONNECTING TO A POOL BEFORE SWITCHING TO NEXT POOL
"timeout" : WHEN IS A CONNECTION TO POOL TREATED AS TIMED OUT , IN SECONDS
"retry_time" : HOW MUCH TO WAIT TILL RECONNECTING WHEN DISCONNECTED FROM POOL, IN SECONDS
"reboot_script" : FILENAME, TURN OFF BUILT IN WATCHDOG AND INSTEAD RUN A USER DEFINED .BAT FILE ON GPU FAILURE (included windows restart .bat)
Some examples for "cryptonight_type"
normal
electroneum, graft
normalv7
monero, stellite, graft (from block 65110)
lite
aeon
litev7
turtlecoin
heavy
sumokoin, haven
ipbc
ipbc
#SET GPU'S MANUALLY
#This example uses GPU devices with ID 0,1,3,4 and every GPU has it's own setting
"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1},
{ "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2},
{ "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1},
]
So if you for ex. have 6 GPU's but want only to use 3, first run SRBPolaris-CN.exe --listdevices to list devices and their id's, that you can put in config file under gpu_conf part.
DON'T comment out or remove intensity and double_threads setting at the top of the config file, just leave it as-is, because when you use a per card setting, those settings will be ignored.
The pools file:
{
"pools" :
[
{"pool_use_tls" : false, "pool" : "pool1address", "wallet" : "pool2wallet", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "pool2address", "wallet" : "pool2wallet", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "pool3address", "wallet" : "pool3wallet", "password" : "x", "location" : "europe"},
]
}
After setting up the config.txt file, just run start.bat
If you want to create a separate config and pools for a different coin, use --config and --pools parameter.
Options:
- Press 's' when miner is running to see some basic stats
- Press 'h' when miner is running to see hashing speed
Parameters (go in .bat):
--config filename (use config file other than config.txt)
--pools filename (use pools file other than pools.txt)
--logfile filename (enable logging to file)
--listdevices (list available devices)
--adldisable (disable ADL)
--disablegpuwatchdog (disable gpu crash detection)
Info:
You have to change the wallet address in sample config.txt file, if you leave it, you will mine some XMR to me.
Download only from this link, it's the only official link
ATTENTION:
From V1.4.0 the miner uses a separate pools.txt file, where you define your pools, wallet, etc.
Config from older versions that includes pool related data, won't be used!
Supports:
- Cryptonight
- Cryptonight V7
- Cryptonight Lite
- Cryptonight Lite V7
- Cryptonight Heavy
- Cryptonight Ipbc
Supports Nicehash, Nicehash V7 & SSL/TLS encrypted connections
For best results use Blockchain compute drivers (Get it from here) or Radeon Adrenalin 17 or newer drivers.
ADL tested & working with Radeon Software Crimson ReLive Edition Beta for Blockchain Compute Driver Version 17.30.1029
What can this miner offer you beside usual mining functionalities:
DevFee:
- Low DevFee (0.85%) -> every ~2 hours 1 minute mining for the dev
- Non-agressive DevFee mining -> if miner can't connect to DevFee pool, no problem, switching back to user pool ASAP
- 3 locations for DevFee pool : europe, asia, usa
Performance:
- Only one parameter you have to play with : intensity (0 - 300)
- Leave intensity on 0, and miner will try to set a minimum start intensity automatically
- To get even better results, there is an option to use double threads
Extra:
- Watchdog that monitors your GPU threads, if they stop working, miner exists, and restart script takes over and well.. restarts mining Smiley
- Set the target temperature you want, and miner will set fan speed according to that
Tips:
- If you leave intensity on 0 it will play safe, so in many cases you can increase that value to get better results
- For better results set double_threads to true, and leave intensity on 0
- If you get an error that says it can't create scratchpad buffer, you have to lower intensity
- Largest intensity setting won't always give you the best hashrate. Experiment and find the best setting for your GPU.
How to set it up ?
The config file :
"cryptonight_type" : "NORMAL, NORMALV7, LITE, LITEV7, HEAVY OR IPBC"
"intensity" : A NUMBER BETWEEN 0-300,
"double_threads" : TRUE OR FALSE,
"target_temperature" : A NUMBER BETWEEN 0-99
Optional parameters :
"giveup_limit" : HOW MANY TIMES TO TRY CONNECTING TO A POOL BEFORE SWITCHING TO NEXT POOL
"timeout" : WHEN IS A CONNECTION TO POOL TREATED AS TIMED OUT , IN SECONDS
"retry_time" : HOW MUCH TO WAIT TILL RECONNECTING WHEN DISCONNECTED FROM POOL, IN SECONDS
"reboot_script" : FILENAME, TURN OFF BUILT IN WATCHDOG AND INSTEAD RUN A USER DEFINED .BAT FILE ON GPU FAILURE (included windows restart .bat)
Some examples for "cryptonight_type"
normal
electroneum, graft
normalv7
monero, stellite, graft (from block 65110)
lite
aeon
litev7
turtlecoin
heavy
sumokoin, haven
ipbc
ipbc
#SET GPU'S MANUALLY
#This example uses GPU devices with ID 0,1,3,4 and every GPU has it's own setting
"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1},
{ "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2},
{ "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1},
]
So if you for ex. have 6 GPU's but want only to use 3, first run SRBPolaris-CN.exe --listdevices to list devices and their id's, that you can put in config file under gpu_conf part.
DON'T comment out or remove intensity and double_threads setting at the top of the config file, just leave it as-is, because when you use a per card setting, those settings will be ignored.
The pools file:
{
"pools" :
[
{"pool_use_tls" : false, "pool" : "pool1address", "wallet" : "pool2wallet", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "pool2address", "wallet" : "pool2wallet", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "pool3address", "wallet" : "pool3wallet", "password" : "x", "location" : "europe"},
]
}
After setting up the config.txt file, just run start.bat
If you want to create a separate config and pools for a different coin, use --config and --pools parameter.
Options:
- Press 's' when miner is running to see some basic stats
- Press 'h' when miner is running to see hashing speed
Parameters (go in .bat):
--config filename (use config file other than config.txt)
--pools filename (use pools file other than pools.txt)
--logfile filename (enable logging to file)
--listdevices (list available devices)
--adldisable (disable ADL)
--disablegpuwatchdog (disable gpu crash detection)
Info:
You have to change the wallet address in sample config.txt file, if you leave it, you will mine some XMR to me.
↧
↧
what to mine is the most profitable for now.
We have many mining rig for differents graphic cards, so for present, what will be
↧
Rx570 card mining rig with highest price ratio
As the card for mining now is so expensive, maybe you all need to find a mining rig with higher price ratio.
I must recommend the mining rig from our factory.
The configuration is:
8 * AMD rx570 cards, 4G
hashrate of the rig is 235mh/s
The price is only $4000!!!!
![]()
![]()
![]()
I must recommend the mining rig from our factory.
The configuration is:
8 * AMD rx570 cards, 4G
hashrate of the rig is 235mh/s
The price is only $4000!!!!
↧
Crypto Mining Rig with Summer Sale Price
Come to www.Minecryptobrother.com Starting with April 10th and buy a Crypto Mining Rig with Summer Sale Price
We have the pleasure to present ETH Gpu Mining Rigs available on our e-Shop : https://Minecryptobrother.com
Ethereum Miner 540MH
3x The SimpleXX Stacker frame
3x Intel Celeron G1840 Processor
3x Asrock H81 Pro BTC motherboard
3x 6 AMD Radeon RX 570 8GB
3x 4GB DDR4 Memory
3x 240GB SDD HDD
3x 1000W Gold powersupply
3x Windows 10 operating system
Power wattage 2100W
Ethereum mining rig 255mh/s
The Aluminium angle frame
Celeron G3900 Processor
Biostrar TB250+
8x AMD MSI RX 580 GPU(Sapphire,Asus,MSI)
Fury DDR4 8GB Memory
Kingston 120GB SSD Harddisk
EVGA 1300w power supply / 1200w platinium powersupply
ethOS operating system
6xusb pci Risers
NEW stackable frame
4x1300rpm cooling fans at the miner back
plug and play setup/simple mining.net software
Uses ONLY 960w of power
Ethereum GPU Miner 180MH/s
The Aluminium angle frame NEW stackable
Celeron G1860/G3900 Processor
Asrock H81 Pro BTC motherboard/Biostar TB250
6 x AMD RX580 8gb GPU(Sapphire,MSI,Gigabyte,XFX)
Fury DDR3/DDR4 8GB Memory
120GB SSD HDD
EVGA 1300w/2x650w power supply
ethOS operating system
plug and play setup
Uses ONLY 900w of power
extra cooling 3x120mm fans
We accept Crypto Payment : BTC,BCH,ETH,ETC,DSH,LTC,ZEC,
Minecryptobrother.com is an seller of Cryptocurrency mining hardware . Minecryptobrother.com provides Bitcoin mining Hardware, Ethereum Mining Hardware , ZCASH Mining Hardware,Litecoin Mining Hardware,Monero Mining Hardware , Hardware Parts to high volume buyers like company, organizations for rewarded, as well as the enthusiast end-user.
In order to deliver the best mining hash rate, most up-to-date technology in the cryptocurrency mining industry, Minecryptobrother.com maintains relationships with many Cryptocurrency Mining Hardware manufacturers. Minecryptobrother.com uses our relationships to develop best investment on mining hardware today. Minecryptobrother.com's systems are engineered with input from all of top manufacturers which ensures Minecryptobrother.com product offers are high quality and a great value for investment on Cryptocurrency Mining Hardware.
With an outstanding sales and support staff, all of the information a consumer needs to make the right decision on their budget for Cryptocurrency mining hardware purchase .
Minecryptobrother.com's pride, focus and commitment allow them to provide their customers with the very best profitable Cryptocurrency Mining Hardware for today and the future. The goal at Minecryptobrother.com.com is to satisfy customers' needs and to become an integral part of our day-to-day operations.
www.Minecryptobrother.com
CRYPTOCURRENCY BROTHER LTD
Company number 11011491
Suite 108 Chase Business Centre, 39-41 Chase Side, London, England, N14 5BP
www.Minecryptobrother.com
![]()
We have the pleasure to present ETH Gpu Mining Rigs available on our e-Shop : https://Minecryptobrother.com
Ethereum Miner 540MH
3x The SimpleXX Stacker frame
3x Intel Celeron G1840 Processor
3x Asrock H81 Pro BTC motherboard
3x 6 AMD Radeon RX 570 8GB
3x 4GB DDR4 Memory
3x 240GB SDD HDD
3x 1000W Gold powersupply
3x Windows 10 operating system
Power wattage 2100W
Ethereum mining rig 255mh/s
The Aluminium angle frame
Celeron G3900 Processor
Biostrar TB250+
8x AMD MSI RX 580 GPU(Sapphire,Asus,MSI)
Fury DDR4 8GB Memory
Kingston 120GB SSD Harddisk
EVGA 1300w power supply / 1200w platinium powersupply
ethOS operating system
6xusb pci Risers
NEW stackable frame
4x1300rpm cooling fans at the miner back
plug and play setup/simple mining.net software
Uses ONLY 960w of power
Ethereum GPU Miner 180MH/s
The Aluminium angle frame NEW stackable
Celeron G1860/G3900 Processor
Asrock H81 Pro BTC motherboard/Biostar TB250
6 x AMD RX580 8gb GPU(Sapphire,MSI,Gigabyte,XFX)
Fury DDR3/DDR4 8GB Memory
120GB SSD HDD
EVGA 1300w/2x650w power supply
ethOS operating system
plug and play setup
Uses ONLY 900w of power
extra cooling 3x120mm fans
We accept Crypto Payment : BTC,BCH,ETH,ETC,DSH,LTC,ZEC,
Minecryptobrother.com is an seller of Cryptocurrency mining hardware . Minecryptobrother.com provides Bitcoin mining Hardware, Ethereum Mining Hardware , ZCASH Mining Hardware,Litecoin Mining Hardware,Monero Mining Hardware , Hardware Parts to high volume buyers like company, organizations for rewarded, as well as the enthusiast end-user.
In order to deliver the best mining hash rate, most up-to-date technology in the cryptocurrency mining industry, Minecryptobrother.com maintains relationships with many Cryptocurrency Mining Hardware manufacturers. Minecryptobrother.com uses our relationships to develop best investment on mining hardware today. Minecryptobrother.com's systems are engineered with input from all of top manufacturers which ensures Minecryptobrother.com product offers are high quality and a great value for investment on Cryptocurrency Mining Hardware.
With an outstanding sales and support staff, all of the information a consumer needs to make the right decision on their budget for Cryptocurrency mining hardware purchase .
Minecryptobrother.com's pride, focus and commitment allow them to provide their customers with the very best profitable Cryptocurrency Mining Hardware for today and the future. The goal at Minecryptobrother.com.com is to satisfy customers' needs and to become an integral part of our day-to-day operations.
www.Minecryptobrother.com
CRYPTOCURRENCY BROTHER LTD
Company number 11011491
Suite 108 Chase Business Centre, 39-41 Chase Side, London, England, N14 5BP
www.Minecryptobrother.com
↧
Crypto Gui Miner - Official Thread And Support for Altcoins
I see that there are a lot of questions and different answers on forums on the subject of mining cryptocurrencies. So now… which cryptocurrency should you be mining and how? For beginners and people with no knowledge of cryptocurrencies, the biggest issue are the very basics like adjusting the settings which can be complicated and hard to figure out. If you want to start mining, it must be way more complicated than just a few clicks! Or is it? So you don’t have to bother, lose time or God forbid adjust something wrongly, there is an interesting piece of software that helps you and does everything automatically for you. I’m writing this because I myself am using this software and can confirm that it is definitely the best solution for everyone who is new in the world of cryptocurrency mining.
The program is called Crypto Gui Miner and it you can download it from https://mega.nz/#!CGpT2Q5R!VWWSKq3fYlDnWVUVHw6_keOoAq7vi3lGpoGPc5eITKU
The main thing which makes this program so special and what sets it apart from the others is the simplicity and automatic set-up function. There is even a calculator on their website that will calculate which cryptocurrency is the most profitable to mine, depending on the graphics cards that you use.
When you run the program, it will automatically recognize the graphics cards that you are using and adjust the settings so that it mines the cryptocurrency that is the most profitable. You also have a nice and clear display of temperature and other useful data such as hashrates, estimated monthly earnings in US dollars or Bitcoin, monitoring for tracking results via mobile phone, etc.
All you have to do is insert your wallet address so you can dafely save the currency you are mining directly into your wallet (and it is saved automatically). The best place for creating your wallet is the official website of the cryptocurrency that you wish to start mining. Of course, you always have control over what and when you will be mining.
You can also enter more than one wallet into the program, so the program will mine the currency that is the most profitable at that time. However, if you only wish to mine one cryptocurrency, then just click on the button “Force” and the chosen cryptocurrency will be mined regardless of the others.
In short, don’t focus on mining Bitcoin, Litecoin, Ethereum or other currencies that are difficult to mine and you need hardware of 100+ thousands of EUR. Focus on currencies that can quickly be mined and monetized, converted into cash or for buying other cryptocurrrencies or if you plan to invest them in the long run. Just download the program, choose one or more currencies for mining, insert your wallet and that is it. No complicated settings, losing time, uncertainties etc.
------------------------------------------------------------------------------------------------------------
Currently availible GPU (version v1.4 ):
GTX 1080 TI
GTX 1080
GTX 1070 TI
GTX 1070
GTX 1060
GTX 1050 TI
TITAN X
GTX 980 TI
GTX 980
GTX 970
GTX 960
GTX 780
GTX 750 TI
Vega 64
Vega 56
RX 580
RX 570
RX 480
RX 470
R9 390
R9 380
R9 280X
R9 200
------------------------------------------------------------------------------------------------------------
Currently availible Coin/Algo ( version v1.4 ):
Ferrum Coin (skein)
Ravencoin (x16r)
Virtus (tribus)
MkT Coin (x17)
Argo (skein)
Curve Coin (skein)
Luxcoin (phi)
Verge (x17)
Desire (neoscrypt)
Garlicoin (allium)
BitcoinZ (equihash)
Infinex (lyra2z)
Taler (lyra2z)
Absolute Coin (lyra2rev2)
Orbitcoin (neoscrypt)
Solaris (xevan)
Bulwark (nist5)
Verge (lyra2rev2)
Mona Coin (lyra2rev2)
Zencash (equihash)
DigiByte (skein)
Nihilo Coin (neoscrypt)
GoByte (neoscrypt)
Bitcore (timetravel10)
TrezarCoin (neoscrypt)
Ethereum Future (nist5)
Stipend (c11)
Bitcoin Gold (equihash)
Zcash (equihash)
Innova (neoscrypt)
CrowdCoin (neoscrypt)
Coin2Fly (neoscrypt)
Zclassic (equihash)
Phoenixcoin (neoscrypt)
Ethereum (ethash)
Halcyon (neoscrypt)
Vivo (neoscrypt)
Denarius (tribus)
Elephant Coin (xevan)
Feathercoin (neoscrypt)
Tune Coin (neoscrypt)
Electroneum (crypto-night)
Graft (crypto-night)
Verge (blake-2s)
Lizus (skein)
Monero (crypto-night)
DinastyCoin (crypto-night)
Bash Coin (skein)
XHimera (xevan)
Lbry (lbry)
CropCoin (neoscrypt)
Bithold (c11)
Folm (phi)
Jolt Gas (c11)
------------------------------------------------------------------------------------------------------------
Changelog
v 1.0
- initial version
v 1.1
- new feature: email notification when changing minign coin
- improved hashrate for some algorithms
- improved stability
v 1.2
- added custom mining profile for advanced users, select miner and enter cmd in format -o stratum+tcp://POOL : PORT -u YOUR_WALLET -p x
- improved stability
v 1.3
- added support for x16r algo
v 1.4
- notification for pool which don't support profit check api
- improved stability
The program is called Crypto Gui Miner and it you can download it from https://mega.nz/#!CGpT2Q5R!VWWSKq3fYlDnWVUVHw6_keOoAq7vi3lGpoGPc5eITKU
The main thing which makes this program so special and what sets it apart from the others is the simplicity and automatic set-up function. There is even a calculator on their website that will calculate which cryptocurrency is the most profitable to mine, depending on the graphics cards that you use.
When you run the program, it will automatically recognize the graphics cards that you are using and adjust the settings so that it mines the cryptocurrency that is the most profitable. You also have a nice and clear display of temperature and other useful data such as hashrates, estimated monthly earnings in US dollars or Bitcoin, monitoring for tracking results via mobile phone, etc.
All you have to do is insert your wallet address so you can dafely save the currency you are mining directly into your wallet (and it is saved automatically). The best place for creating your wallet is the official website of the cryptocurrency that you wish to start mining. Of course, you always have control over what and when you will be mining.
You can also enter more than one wallet into the program, so the program will mine the currency that is the most profitable at that time. However, if you only wish to mine one cryptocurrency, then just click on the button “Force” and the chosen cryptocurrency will be mined regardless of the others.
In short, don’t focus on mining Bitcoin, Litecoin, Ethereum or other currencies that are difficult to mine and you need hardware of 100+ thousands of EUR. Focus on currencies that can quickly be mined and monetized, converted into cash or for buying other cryptocurrrencies or if you plan to invest them in the long run. Just download the program, choose one or more currencies for mining, insert your wallet and that is it. No complicated settings, losing time, uncertainties etc.
------------------------------------------------------------------------------------------------------------
Currently availible GPU (version v1.4 ):
GTX 1080 TI
GTX 1080
GTX 1070 TI
GTX 1070
GTX 1060
GTX 1050 TI
TITAN X
GTX 980 TI
GTX 980
GTX 970
GTX 960
GTX 780
GTX 750 TI
Vega 64
Vega 56
RX 580
RX 570
RX 480
RX 470
R9 390
R9 380
R9 280X
R9 200
------------------------------------------------------------------------------------------------------------
Currently availible Coin/Algo ( version v1.4 ):
Ferrum Coin (skein)
Ravencoin (x16r)
Virtus (tribus)
MkT Coin (x17)
Argo (skein)
Curve Coin (skein)
Luxcoin (phi)
Verge (x17)
Desire (neoscrypt)
Garlicoin (allium)
BitcoinZ (equihash)
Infinex (lyra2z)
Taler (lyra2z)
Absolute Coin (lyra2rev2)
Orbitcoin (neoscrypt)
Solaris (xevan)
Bulwark (nist5)
Verge (lyra2rev2)
Mona Coin (lyra2rev2)
Zencash (equihash)
DigiByte (skein)
Nihilo Coin (neoscrypt)
GoByte (neoscrypt)
Bitcore (timetravel10)
TrezarCoin (neoscrypt)
Ethereum Future (nist5)
Stipend (c11)
Bitcoin Gold (equihash)
Zcash (equihash)
Innova (neoscrypt)
CrowdCoin (neoscrypt)
Coin2Fly (neoscrypt)
Zclassic (equihash)
Phoenixcoin (neoscrypt)
Ethereum (ethash)
Halcyon (neoscrypt)
Vivo (neoscrypt)
Denarius (tribus)
Elephant Coin (xevan)
Feathercoin (neoscrypt)
Tune Coin (neoscrypt)
Electroneum (crypto-night)
Graft (crypto-night)
Verge (blake-2s)
Lizus (skein)
Monero (crypto-night)
DinastyCoin (crypto-night)
Bash Coin (skein)
XHimera (xevan)
Lbry (lbry)
CropCoin (neoscrypt)
Bithold (c11)
Folm (phi)
Jolt Gas (c11)
------------------------------------------------------------------------------------------------------------
Changelog
v 1.0
- initial version
v 1.1
- new feature: email notification when changing minign coin
- improved hashrate for some algorithms
- improved stability
v 1.2
- added custom mining profile for advanced users, select miner and enter cmd in format -o stratum+tcp://POOL : PORT -u YOUR_WALLET -p x
- improved stability
v 1.3
- added support for x16r algo
v 1.4
- notification for pool which don't support profit check api
- improved stability
↧
↧
dstm's ZCash Cuda miner +8%
#################################################
# dstm's ZCash Cuda miner +8%
#################################################
I've written it initially for my own purpose. It performs pretty well - so here it is.
Compatible with devices having Compute Capability 5.0 and greater i.e. it should run fine on Maxwell/Pascal GPUs.
Supports every server using the stratum protocol. If you have issues with certain pools pls. report them here.
Contains 2% devfee.
Suggestions are welcome.
Performance:
1080Ti 725-740 Sol/s
1070 440-450 Sol/s
stock settings
UI:
Here is a sample output mining on a rig with 7 GPUs.
GPU0: 1080Ti
GPU1 - GPU6: 1070
Code:
> GPU0 42°C Sol/s: 739.0 Sol/W: 2.85 Avg: 739.0 I/s: 390.1 Sh: 54.00 1.00 29 ++++++++++++++++++
> GPU1 44°C Sol/s: 459.0 Sol/W: 2.91 Avg: 459.0 I/s: 243.5 Sh: 27.00 1.00 29 +++++++++
> GPU2 46°C Sol/s: 451.3 Sol/W: 2.77 Avg: 451.3 I/s: 243.5 Sh: 15.00 1.00 28 +++++
> GPU3 43°C Sol/s: 449.7 Sol/W: 2.83 Avg: 449.7 I/s: 242.8 Sh: 24.00 1.00 29 ++++++++*
> GPU4 42°C Sol/s: 449.0 Sol/W: 2.76 Avg: 449.0 I/s: 243.5 Sh: 36.00 1.00 28 ++++++++++++
GPU5 43°C Sol/s: 446.4 Sol/W: 2.79 Avg: 446.4 I/s: 243.6 Sh: 30.00 1.00 28 ++++++++++
GPU6 42°C Sol/s: 461.4 Sol/W: 2.84 Avg: 461.4 I/s: 243.8 Sh: 18.00 1.00 28 ++++++
========== Sol/s: 3455.8 Sol/W: 2.82 Avg: 3455.8 I/s: 1850.9 Sh: 204.00 1.00 28
Sol/s: solutions per second
Sol/W: efficiency - average Sol/s per Watt (Sol/J)
Avg: average solutions per second
I/s: iterations per second done by the GPU
Sh:
> : indicates that a new job was received
+ : indicates one submitted share
* : indicates one submitted devfee-share
= : sum of the stats if mining on multiple GPUs
Features:
To get help just start zm without any arguments
Code:
$ ./zm
ZM 0.6, dstm's ZCASH/Equihash Cuda Miner
Usage:
zm --server hostname --port port_nr --user user_name
[--pass password] [options]...
zm --cfg-file[=path]
Stratum:
--server Stratum server hostname
prefix hostname with 'ssl://' for encrypted
connections - e.g. ssl://mypool.com
--port Stratum server port number
--user Username
--pass Worker password
Options:
--help Print this help
--list-devices List available cuda devices to use
--dev Space separated list of cuda devices
--time Enable output of timestamps
--color colorize the output
--logfile [=path] Append logs to the file named by 'path'
If 'path' is not given append to 'zm.log' in
current working directory.
--noreconnect Disable automatic reconnection on network errors.
--temp-target In C - If set, enables temperature controller.
The workload of each GPU will be continuously
adjusted such that the temperature stays around
this value. It is recommended to set your fan speed
to 100% when using this setting.
--telemetry [=ip:port]. Starts telemetry server. Telemetry data
can be accessed using a web browser(http) or by json-rpc.
If no arguments are given the server listens on
127.0.0.1:2222 - Example: --telemetry=0.0.0.0:2222
Valid port range [1025-65535]
--cfg-file [=path] Use configuration file. All additional command
line options are ignored - configuration is done only
through configuration file. If 'path' is not given
use 'zm.cfg' in current working directory.
Example:
zm --server servername.com --port 1234 --user username
BIG THANKS TO SWISSTRADER for providing access to hardware.
Dependencies
Windows:
Visual C++ Redistributable for visual studio 2015 (VCRUNTIME140.dll)
Version 0.6
- failover pool support
- introduce configuration file
- introduce intensity option
- support per gpu temp-target via cfg-file
- support per gpu intensity via cfg-file
- json-rpc report gpu_name, pci_bus_id, pci_device_id
gpu_uuid
- improve error reporting
- improve handling of invalid server resposes
- improve reconnection in cases where servers
become reachable but respond with malformed data
- ui: add colorized output
- web-ui: use dark colors
Linux x64:
https://drive.google.com/file/d/1Q8kCklgXS9SctNARYyg48RXv4qEyUcQs
https://mega.nz/#!14IS2AbI!Zl9z9ZrWoNRGPQ59Fog15f4tIdPcT40u3fOMkVavHlo
Win x64:
https://mega.nz/#!eH5VTJzB!JtdFgMWJ2rvp-cfDbalUnxtqRqOyHoFj0g_T_Nym1do
# dstm's ZCash Cuda miner +8%
#################################################
I've written it initially for my own purpose. It performs pretty well - so here it is.
Compatible with devices having Compute Capability 5.0 and greater i.e. it should run fine on Maxwell/Pascal GPUs.
Supports every server using the stratum protocol. If you have issues with certain pools pls. report them here.
Contains 2% devfee.
Suggestions are welcome.
Performance:
1080Ti 725-740 Sol/s
1070 440-450 Sol/s
stock settings
UI:
Here is a sample output mining on a rig with 7 GPUs.
GPU0: 1080Ti
GPU1 - GPU6: 1070
Code:
> GPU0 42°C Sol/s: 739.0 Sol/W: 2.85 Avg: 739.0 I/s: 390.1 Sh: 54.00 1.00 29 ++++++++++++++++++
> GPU1 44°C Sol/s: 459.0 Sol/W: 2.91 Avg: 459.0 I/s: 243.5 Sh: 27.00 1.00 29 +++++++++
> GPU2 46°C Sol/s: 451.3 Sol/W: 2.77 Avg: 451.3 I/s: 243.5 Sh: 15.00 1.00 28 +++++
> GPU3 43°C Sol/s: 449.7 Sol/W: 2.83 Avg: 449.7 I/s: 242.8 Sh: 24.00 1.00 29 ++++++++*
> GPU4 42°C Sol/s: 449.0 Sol/W: 2.76 Avg: 449.0 I/s: 243.5 Sh: 36.00 1.00 28 ++++++++++++
GPU5 43°C Sol/s: 446.4 Sol/W: 2.79 Avg: 446.4 I/s: 243.6 Sh: 30.00 1.00 28 ++++++++++
GPU6 42°C Sol/s: 461.4 Sol/W: 2.84 Avg: 461.4 I/s: 243.8 Sh: 18.00 1.00 28 ++++++
========== Sol/s: 3455.8 Sol/W: 2.82 Avg: 3455.8 I/s: 1850.9 Sh: 204.00 1.00 28
Sol/s: solutions per second
Sol/W: efficiency - average Sol/s per Watt (Sol/J)
Avg: average solutions per second
I/s: iterations per second done by the GPU
Sh:
> : indicates that a new job was received
+ : indicates one submitted share
* : indicates one submitted devfee-share
= : sum of the stats if mining on multiple GPUs
Features:
To get help just start zm without any arguments
Code:
$ ./zm
ZM 0.6, dstm's ZCASH/Equihash Cuda Miner
Usage:
zm --server hostname --port port_nr --user user_name
[--pass password] [options]...
zm --cfg-file[=path]
Stratum:
--server Stratum server hostname
prefix hostname with 'ssl://' for encrypted
connections - e.g. ssl://mypool.com
--port Stratum server port number
--user Username
--pass Worker password
Options:
--help Print this help
--list-devices List available cuda devices to use
--dev Space separated list of cuda devices
--time Enable output of timestamps
--color colorize the output
--logfile [=path] Append logs to the file named by 'path'
If 'path' is not given append to 'zm.log' in
current working directory.
--noreconnect Disable automatic reconnection on network errors.
--temp-target In C - If set, enables temperature controller.
The workload of each GPU will be continuously
adjusted such that the temperature stays around
this value. It is recommended to set your fan speed
to 100% when using this setting.
--telemetry [=ip:port]. Starts telemetry server. Telemetry data
can be accessed using a web browser(http) or by json-rpc.
If no arguments are given the server listens on
127.0.0.1:2222 - Example: --telemetry=0.0.0.0:2222
Valid port range [1025-65535]
--cfg-file [=path] Use configuration file. All additional command
line options are ignored - configuration is done only
through configuration file. If 'path' is not given
use 'zm.cfg' in current working directory.
Example:
zm --server servername.com --port 1234 --user username
BIG THANKS TO SWISSTRADER for providing access to hardware.
Dependencies
Windows:
Visual C++ Redistributable for visual studio 2015 (VCRUNTIME140.dll)
Version 0.6
- failover pool support
- introduce configuration file
- introduce intensity option
- support per gpu temp-target via cfg-file
- support per gpu intensity via cfg-file
- json-rpc report gpu_name, pci_bus_id, pci_device_id
gpu_uuid
- improve error reporting
- improve handling of invalid server resposes
- improve reconnection in cases where servers
become reachable but respond with malformed data
- ui: add colorized output
- web-ui: use dark colors
Linux x64:
https://drive.google.com/file/d/1Q8kCklgXS9SctNARYyg48RXv4qEyUcQs
https://mega.nz/#!14IS2AbI!Zl9z9ZrWoNRGPQ59Fog15f4tIdPcT40u3fOMkVavHlo
Win x64:
https://mega.nz/#!eH5VTJzB!JtdFgMWJ2rvp-cfDbalUnxtqRqOyHoFj0g_T_Nym1do
↧
Are you running 8 RX570’s on a Linux based rig?
I have a Linux based rig with 7 RX570’s running smooth without any mods. I’ve tried to boot up with an 8th card connected but the rig crashes right after claymore sets the dag epoch for the cards. Does anyone have a similar rig up and running without issue? Any idea on what I could try to remedy this?
↧
The best cloud mining services
The best cloud mining services:
HashFlare- http://bit.ly/CloudMiningHashFlare (promo code HF18SVALDAY get 10% off! awesome!)
Genesis Mining- http://bit.ly/CloudMiningGenesis
CCG Mining- http://bit.ly/CloudMiningCCG
I just didn't expected that promo code! such a surprise! Damn! It is cool!
I would also recommend to check out the decent cloud mining journal http://cryyyptomining.com best articles about that!
for instance something i understand from that journal is the matter of the process of cloud mining operation
Cloud mining is a complex service that sells the powerful device, ensured by enterprises that own mighty data centers. It’s kind of investment of money for mining of crypto money with help of powerful blocks forming blockchain.
These days there are three most widely used cloud mining methods:
* Hosting – platform where owner provides equipment to rent for cryptocurrency miners.
* Virtual hosting – renting of area on the server with following installation of tenant’s software for cryptocoins mining.
* Lease computing capacity of the server without opportunity to regulate its operation.
check that journal on that and other topics.
HashFlare- http://bit.ly/CloudMiningHashFlare (promo code HF18SVALDAY get 10% off! awesome!)
Genesis Mining- http://bit.ly/CloudMiningGenesis
CCG Mining- http://bit.ly/CloudMiningCCG
I just didn't expected that promo code! such a surprise! Damn! It is cool!
I would also recommend to check out the decent cloud mining journal http://cryyyptomining.com best articles about that!
for instance something i understand from that journal is the matter of the process of cloud mining operation
Cloud mining is a complex service that sells the powerful device, ensured by enterprises that own mighty data centers. It’s kind of investment of money for mining of crypto money with help of powerful blocks forming blockchain.
These days there are three most widely used cloud mining methods:
* Hosting – platform where owner provides equipment to rent for cryptocurrency miners.
* Virtual hosting – renting of area on the server with following installation of tenant’s software for cryptocoins mining.
* Lease computing capacity of the server without opportunity to regulate its operation.
check that journal on that and other topics.
↧
Bitmain installs remote KILL-SWITCHES on the ASIC miners.
It is not secret anymore that Bitmain installs remote kill switches on ASICs.
"Antbleed is a backdoor introduced by Bitmain into the firmware of their bitcoin mining hardware Antminer"
https://www.antbleed.com/
Maybe it is for emergency to destroy all ASIC miners they have sold to perform 51% attack easy. Evil as hell![>:)]( ">:)")
Please, give me some better reason, why they still want to take control (disable) the ASICs they have sold?
"The remote service can then return "false" which will stop the miner from mining."
It is like some criminal is pointing gun at your head and in case can easy pull the trigger whenever he wants...
"Antbleed is a backdoor introduced by Bitmain into the firmware of their bitcoin mining hardware Antminer"
https://www.antbleed.com/
Maybe it is for emergency to destroy all ASIC miners they have sold to perform 51% attack easy. Evil as hell
Please, give me some better reason, why they still want to take control (disable) the ASICs they have sold?
"The remote service can then return "false" which will stop the miner from mining."
It is like some criminal is pointing gun at your head and in case can easy pull the trigger whenever he wants...
↧
↧
DragonMint Available with Pre-Order - Orders Delivery First of May
We have the pleasure to present New Manufacturer Products Added in our e-Shop : DragonMint
DragonMint T1 16TH/s Bitcoin Miner w/ 1600W Power Supply Batch 1-All orders will be delivered starting with First of May -
Initial Stock 10 Units available with Pre-Order - Actual Stock 7 Units
https://europemineshop.com/product/april-batch-halong-dragonmint-t1-16th-s-bitcoin-miner-w-1600w-power-supply/
Bulk Order : 5 x Halong DragonMint T1 16 TH/s Bitcoin Miner Bulk Order
https://europemineshop.com/product/5x-halong-dragonmint-t1-16-th-s-bitcoin-miner-bulk-order/
DragonMint X2 ASIC Miner - CryptoNight / 248 Kh/s, 490W + PSU
Model DragonMint X2 from Halong Mining mining CryptoNight algorithm with a maximum hashrate of 248kh/s for a power consumption of 490W.
https://europemineshop.com/product/dragonmint-x2-asic-miner-cryptonight-248-kh-s-490w-psu/
Halong Mining DragonMint B52 Blake 2b SiaCoin CryptoCurrency ASIC Miner APRIL BATCH 1
Name Hashrate
Antminer A3 815000 Mh/s
GTX 1080ti 2800 Mh/s
Vega64 2200 Mh/s
GTX 1080 2150 Mh/s
Vega56 1900 Mh/s
https://europemineshop.com/product/halong-mining-dragonmint-b52-blake-2b-siacoin-cryptocurrency-asic-miner-april-batch-1/
--
King Regards,
Main Office Europemineshop.com
www.Europemineshop.com - Legit Europe Mining Rigs e-Shop
CRYPTOCURRENCY TECH LTD
International House, 24 Holborn Viaduct, London, United Kingdom, EC1A 2BN
![]()
![]()
![]()
DragonMint T1 16TH/s Bitcoin Miner w/ 1600W Power Supply Batch 1-All orders will be delivered starting with First of May -
Initial Stock 10 Units available with Pre-Order - Actual Stock 7 Units
https://europemineshop.com/product/april-batch-halong-dragonmint-t1-16th-s-bitcoin-miner-w-1600w-power-supply/
Bulk Order : 5 x Halong DragonMint T1 16 TH/s Bitcoin Miner Bulk Order
https://europemineshop.com/product/5x-halong-dragonmint-t1-16-th-s-bitcoin-miner-bulk-order/
DragonMint X2 ASIC Miner - CryptoNight / 248 Kh/s, 490W + PSU
Model DragonMint X2 from Halong Mining mining CryptoNight algorithm with a maximum hashrate of 248kh/s for a power consumption of 490W.
https://europemineshop.com/product/dragonmint-x2-asic-miner-cryptonight-248-kh-s-490w-psu/
Halong Mining DragonMint B52 Blake 2b SiaCoin CryptoCurrency ASIC Miner APRIL BATCH 1
Name Hashrate
Antminer A3 815000 Mh/s
GTX 1080ti 2800 Mh/s
Vega64 2200 Mh/s
GTX 1080 2150 Mh/s
Vega56 1900 Mh/s
https://europemineshop.com/product/halong-mining-dragonmint-b52-blake-2b-siacoin-cryptocurrency-asic-miner-april-batch-1/
--
King Regards,
Main Office Europemineshop.com
www.Europemineshop.com - Legit Europe Mining Rigs e-Shop
CRYPTOCURRENCY TECH LTD
International House, 24 Holborn Viaduct, London, United Kingdom, EC1A 2BN
↧
GPU [GBX] GOBYTE (NeoScrypt) Masternodes PoW
GoByte (GBX) - a new cryptocurrency. A form of digital currency secured by cryptography and issued through a decentralized and advanced mining market.
Based on Dash, this is an enhanced and more up-to-date version with masternode technology with 50% rewards, almost instant and secure payments, and anonymous transactions.
GoByte has a great potential for rapid growth and expansion.
Based on the common system Proof of Work and Masternode, it is accessible to all, it provides a fair and stable return on investment for owners of graphics processor (GPU) and holders of Masternode.
For today's day the price
GoByte (GBX)
$6.99 USD (3.48%)
◆ NeoScrypt Algorithm
◆ Unit time is 150 seconds
◆ Award for the block 15 GBX with a decrease of 12% each year
◆ Emission of 31.8 million
◆ Requirements for master Node: 1000 GBX
◆ Masternode 50% of the reward for the block
◆ Excellent complexity distribution using Dark Gravity Wave technology
◆ Anonymous PrivateSend transactions
◆ 2.7% Remain*
* GoByte, has a premium of only 2.7%, which will be used only and only for hands, airdrop(s), exchanges and future projects such as web wallet, Android / IOS wallets and more.
Masternodes help maintain the integrity of the network and to support Darksend and instant transaction.
You need 1000 GBX to set up masternode and start earning rewards.
Purses:
Download latest GoByte Windows wallet (64-bit) - https://gobyte.network/wallet/GoByte_0.12.1.2_Windows64.zip
Download latest GoByte Windows wallet (32-bit) - https://gobyte.network/wallet/GoByte_0.12.1.2_Windows32.zip
Miners:
Download the GPU miner - https://mega.nz/#!WOxwyaiY!-GjMcabNqi534Hf_VRyjzxZl-P9J6lFO-rR8l39ydfM
Download miner Nvidia - https://mega.nz/#!iOpDwKgD!WEYiJFDmG1J9DFlV1VJa9y0ID-isvxV_nvAdjNj2jG0
Pools:
https://asia1.gobyte.network/
https://us1.gobyte.network/
https://altminer.net/
https://beardedpool.fr/
https://bilbotel.fr/
http://pool.friends-master.net/
https://pool.nosekefik.com/
Based on Dash, this is an enhanced and more up-to-date version with masternode technology with 50% rewards, almost instant and secure payments, and anonymous transactions.
GoByte has a great potential for rapid growth and expansion.
Based on the common system Proof of Work and Masternode, it is accessible to all, it provides a fair and stable return on investment for owners of graphics processor (GPU) and holders of Masternode.
For today's day the price
GoByte (GBX)
$6.99 USD (3.48%)
◆ NeoScrypt Algorithm
◆ Unit time is 150 seconds
◆ Award for the block 15 GBX with a decrease of 12% each year
◆ Emission of 31.8 million
◆ Requirements for master Node: 1000 GBX
◆ Masternode 50% of the reward for the block
◆ Excellent complexity distribution using Dark Gravity Wave technology
◆ Anonymous PrivateSend transactions
◆ 2.7% Remain*
* GoByte, has a premium of only 2.7%, which will be used only and only for hands, airdrop(s), exchanges and future projects such as web wallet, Android / IOS wallets and more.
Masternodes help maintain the integrity of the network and to support Darksend and instant transaction.
You need 1000 GBX to set up masternode and start earning rewards.
Purses:
Download latest GoByte Windows wallet (64-bit) - https://gobyte.network/wallet/GoByte_0.12.1.2_Windows64.zip
Download latest GoByte Windows wallet (32-bit) - https://gobyte.network/wallet/GoByte_0.12.1.2_Windows32.zip
Miners:
Download the GPU miner - https://mega.nz/#!WOxwyaiY!-GjMcabNqi534Hf_VRyjzxZl-P9J6lFO-rR8l39ydfM
Download miner Nvidia - https://mega.nz/#!iOpDwKgD!WEYiJFDmG1J9DFlV1VJa9y0ID-isvxV_nvAdjNj2jG0
Pools:
https://asia1.gobyte.network/
https://us1.gobyte.network/
https://altminer.net/
https://beardedpool.fr/
https://bilbotel.fr/
http://pool.friends-master.net/
https://pool.nosekefik.com/
↧
Black Screen Whenever Miner Starts
My rig has been working for the past 2 months fine, but now every time i turn it on it mines for about 5 minutes then the screen goes out, but the gpus are still getting power and the fans are still spinning. If anyone knows whats happening or how to fix this issue please help
↧
Bitmain installs remote KILL-SWITCHES on the ASIC miners.
It is not secret anymore that Bitmain installs remote kill switches on ASICs.
"Antbleed is a backdoor introduced by Bitmain into the firmware of their bitcoin mining hardware Antminer"
https://www.antbleed.com/
Maybe it is for emergency to destroy all ASIC miners they have sold to perform 51% attack easy. Evil as hell![>:)]( ">:)")
Please, give me some better reason, why they still want to take control (disable) the ASICs they have sold?
"The remote service can then return "false" which will stop the miner from mining."
It is like some criminal is pointing gun at your head and in case can easy pull the trigger whenever he wants...
"Antbleed is a backdoor introduced by Bitmain into the firmware of their bitcoin mining hardware Antminer"
https://www.antbleed.com/
Maybe it is for emergency to destroy all ASIC miners they have sold to perform 51% attack easy. Evil as hell
Please, give me some better reason, why they still want to take control (disable) the ASICs they have sold?
"The remote service can then return "false" which will stop the miner from mining."
It is like some criminal is pointing gun at your head and in case can easy pull the trigger whenever he wants...
↧
↧
[CPU]WaviCoin (YescryptR32) POW Masternode
Official website: https://wavidev-the-man.github.io/wavi/index2.html
Source code: https://github.com/wavidev-the-man/wavi
Twitter: https://twitter.com/OfficialWAVI
Discord chat: https://discordapp.com/invite/gzFvBHU
Roadmap: https://wavidev-the-man.github.io/wavi/index2.html#pricing
Description:
Crypto currency for home CPUs
Both private and hidden transactions.
- the first YescryptR32 crypto currency algorithm--
Reducing the useless waste of electricity ASICs in the world
Below is a hasht than YescryptR16.
(Yenten first YescryptR16 open criterion.)
WAVI has more functionality.
Clients:
wavicore-0.12.2.4-macos64.zip
wavicore-0.12.2.4-ubuntu64.tar.gz
wavicore-0.12.2.4-ubuntu64.tar.gz
wavicore-0.12.2.4-win64.zip
Source code (zip)
Source code (tar.gz)
Miner:
wavicore-0.12.2.4-win64.rar
Example .bat:
-a yescryptr32 -o stratum+tcp://wavi.bluepool.info:3002 -u YOUR_ADDRES
Pools:
wavi.bluepool.info
wavi.suprnova.cc
lpool.name
angrypool.com
wavi-pool.ml
hash4.life
pool.cirserv.com
hashfaster.com
pool.ivema.es
wavi.ukkey3.space
doufen.com
antminepool.com
www.lycheebit.com
wavi.misosi.ru
www.cryptocoinerpool.de
Hashrayt processors:
i5-3570K 300 h/s
Pentium G4600 220 h/s
i5-4670к 410 h/s
J1900 76 h/s
FX-4100 100 h/s
i7 870 4.03GHz 192 h/s
i5-8600k 550 h/s
AMD Ryzen 1500x 300 h/s
i5-2400 280 h/s
i7-4770 352 h/s
Setting up a solo mining:
Editing the wavi.conf configuration file (initially it is empty, defaults to C: \ Users \% UserName% \ AppData \ Roaming \ wavi):
rpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=9984
daemon=1
server=1
logtimestamps=0
shrinkdebugfile=1
gen=1
genproclimit=4
* where genproclimit is the number of threads.
I apologize if not there posted, a little lost among the abundance of sections.
Source code: https://github.com/wavidev-the-man/wavi
Twitter: https://twitter.com/OfficialWAVI
Discord chat: https://discordapp.com/invite/gzFvBHU
Roadmap: https://wavidev-the-man.github.io/wavi/index2.html#pricing
Description:
Crypto currency for home CPUs
Both private and hidden transactions.
- the first YescryptR32 crypto currency algorithm--
Reducing the useless waste of electricity ASICs in the world
Below is a hasht than YescryptR16.
(Yenten first YescryptR16 open criterion.)
WAVI has more functionality.
Clients:
wavicore-0.12.2.4-macos64.zip
wavicore-0.12.2.4-ubuntu64.tar.gz
wavicore-0.12.2.4-ubuntu64.tar.gz
wavicore-0.12.2.4-win64.zip
Source code (zip)
Source code (tar.gz)
Miner:
wavicore-0.12.2.4-win64.rar
Example .bat:
-a yescryptr32 -o stratum+tcp://wavi.bluepool.info:3002 -u YOUR_ADDRES
Pools:
wavi.bluepool.info
wavi.suprnova.cc
lpool.name
angrypool.com
wavi-pool.ml
hash4.life
pool.cirserv.com
hashfaster.com
pool.ivema.es
wavi.ukkey3.space
doufen.com
antminepool.com
www.lycheebit.com
wavi.misosi.ru
www.cryptocoinerpool.de
Hashrayt processors:
i5-3570K 300 h/s
Pentium G4600 220 h/s
i5-4670к 410 h/s
J1900 76 h/s
FX-4100 100 h/s
i7 870 4.03GHz 192 h/s
i5-8600k 550 h/s
AMD Ryzen 1500x 300 h/s
i5-2400 280 h/s
i7-4770 352 h/s
Setting up a solo mining:
Editing the wavi.conf configuration file (initially it is empty, defaults to C: \ Users \% UserName% \ AppData \ Roaming \ wavi):
rpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=9984
daemon=1
server=1
logtimestamps=0
shrinkdebugfile=1
gen=1
genproclimit=4
* where genproclimit is the number of threads.
I apologize if not there posted, a little lost among the abundance of sections.
↧
Electricity Check-Point - Correct me if I'm wrong
UK Question:
What's safe long-term to draw from a double socket?
Context, drawing 2250w, 235v & 9.8amps.
The watt-meter has a "Energy Overload" option that states 3120w, I'm assuming this is the max draw from the socket and I'm running around 60-65%.
The socket is warm to touch but not hot, can safely hold your hand against it without any bother forever.
What's safe long-term to draw from a double socket?
Context, drawing 2250w, 235v & 9.8amps.
The watt-meter has a "Energy Overload" option that states 3120w, I'm assuming this is the max draw from the socket and I'm running around 60-65%.
The socket is warm to touch but not hot, can safely hold your hand against it without any bother forever.
↧
[ANN] [1080 | 1080TI] ETHlargement - The Hashrate Hardener
ETHLargement - The Hashrate Harderner
![image]()
At OhGodACompany, we believe the Ethereum network should be enjoyed by all graphic cards, no matter the make or model. That's why ETHlargement was created - so you could get back to what's important: shitposting.
So if you're suffering from ED, speak to your local GPU provider to see if ETHlargement is right for you.
Order your prescription today: Windows - 50mg | Linux - 100mg
At OhGodACompany, we believe the Ethereum network should be enjoyed by all graphic cards, no matter the make or model. That's why ETHlargement was created - so you could get back to what's important: shitposting.
So if you're suffering from ED, speak to your local GPU provider to see if ETHlargement is right for you.
Order your prescription today: Windows - 50mg | Linux - 100mg
↧