Hello,
I'm having an issue flashing my RX570 GPUs and getting my system to recognize all 6 cards consistently. I have different mining systems setup right now using a mix of RX470 and RX570 GPUs, all rigs are running 6 GPUs, all stable with both flashed and not flashed bios. There doesn't seem to be an issue with these.
However I started building systems using only RX570 GPUs and I can't get the system to recognize all 6 cards after they're flashed. The system will recognize all 6 cards if they're using the original bios (and stable) and the system will recognize each individual card if they're flashed. However when I try to boot with all 6 GPUs installed, I either just get a black screen, or it will only post with sometimes 2 or 4 or 5 GPUs, never with 6.
All my setups are using G4400 CPU, MSI Z170a gaming M5, 8 GB 2133 ram, kingston 120GB SSD. The GPUs have been a mix of Sapphire, MSI, Gigabyte, Asus both RX470 and RX570. 4G encoding is enabled. GEN1. And Win10 support (system will not recognize 6 GPUs otherwise in any configuration). I'm using Polaris 1.4.1 for the RX 470 cards, and jaschaknack for the RX570 cards. I know some people are trying to get Z170 to recognize 7 GPUs, I have never been able to get this to work with any configuration of cards. I'm using 16.11.5/17.5.1 drivers (this seems to be the only stable configurations for me).
Again, I have no issue with RX470 or a mix of RX470/570 systems with both flashed and non flashed bios. This is only with RX570 flashed bios cards.
Has anyone else run into this?
Any help will be appreciated.
Thanks,
I'm having an issue flashing my RX570 GPUs and getting my system to recognize all 6 cards consistently. I have different mining systems setup right now using a mix of RX470 and RX570 GPUs, all rigs are running 6 GPUs, all stable with both flashed and not flashed bios. There doesn't seem to be an issue with these.
However I started building systems using only RX570 GPUs and I can't get the system to recognize all 6 cards after they're flashed. The system will recognize all 6 cards if they're using the original bios (and stable) and the system will recognize each individual card if they're flashed. However when I try to boot with all 6 GPUs installed, I either just get a black screen, or it will only post with sometimes 2 or 4 or 5 GPUs, never with 6.
All my setups are using G4400 CPU, MSI Z170a gaming M5, 8 GB 2133 ram, kingston 120GB SSD. The GPUs have been a mix of Sapphire, MSI, Gigabyte, Asus both RX470 and RX570. 4G encoding is enabled. GEN1. And Win10 support (system will not recognize 6 GPUs otherwise in any configuration). I'm using Polaris 1.4.1 for the RX 470 cards, and jaschaknack for the RX570 cards. I know some people are trying to get Z170 to recognize 7 GPUs, I have never been able to get this to work with any configuration of cards. I'm using 16.11.5/17.5.1 drivers (this seems to be the only stable configurations for me).
Again, I have no issue with RX470 or a mix of RX470/570 systems with both flashed and non flashed bios. This is only with RX570 flashed bios cards.
Has anyone else run into this?
Any help will be appreciated.
Thanks,