Hi everyone, I am just getting back into mining and figured I'd test on my regular home PC running windows 7. I had an old R9 280x and am getting ~13 MH/s with a stock Claymore setup. I saw that the RX 480's get mid 20's and use less power, so I sprung for a ASUS rx480 8gb model. I was only able to get about 14.5 MH/s with the new rx 480. Something was obviously wrong. I tried multiple drivers but no luck. Attached are screenshots BEFORE I blew the poor thing up with a bad bios file. Wondering if anyone can spot what I was doing wrong (before the obvious bios snafu), and also if someone could toss me some breadcrumbs for some safe but more effective bios settings. I suppose in hindsight I should have left the bios alone since 14.5 MH/s was likely a hardware or driver issue. I'll bootstrap-slap the old bios back into the card if I can, which will take a bit so no rush!
I used to mine a few litecoins back in 2014. I recall you needed the SDK and had to properly init the miner using that environment. I couldn't find any reference to this in the FAQs, so is this still a thing?
Thanks in advance!
![]()
![]()
I used to mine a few litecoins back in 2014. I recall you needed the SDK and had to properly init the miner using that environment. I couldn't find any reference to this in the FAQs, so is this still a thing?
Thanks in advance!
