So I'm setting up a Windows 10 rig (I failed at an attempt with Ubuntu, which I used with my R7 370)... I followed this guide: https://steemit.com/mining/@jsfoo8/basic-guide-mining-ethereum-with-rx400-rx500-gpus
I'm using:
-Crimson 17.4.3 drivers
-Claymore 9.4
Seems like a fairly simple setup. I got everything together, I run the start.bat file (modified with my pool/address), it recognizes my GPU and connects to the server... then it starts mining, but its giving me 0.000 Mh/s and 0 shares.
I don't know why it's not putting out anything. Claymore recognizes the card. I plugged a monitor into the card via HDMI and it works, screen displays. Fans run.
However, if I run Claymore with the screen attached, Windows completely crashes and has to reboot. It only runs if there is no monitor attached, but gives 0.000 Mh/s. Does anyone have any ideas?
I'm using:
-Crimson 17.4.3 drivers
-Claymore 9.4
Seems like a fairly simple setup. I got everything together, I run the start.bat file (modified with my pool/address), it recognizes my GPU and connects to the server... then it starts mining, but its giving me 0.000 Mh/s and 0 shares.
I don't know why it's not putting out anything. Claymore recognizes the card. I plugged a monitor into the card via HDMI and it works, screen displays. Fans run.
However, if I run Claymore with the screen attached, Windows completely crashes and has to reboot. It only runs if there is no monitor attached, but gives 0.000 Mh/s. Does anyone have any ideas?