Hello! I've noticed on the Nanopool website, which is the pool that I mine for, My average hashrate is almost always lower than the miners console itself is showing. The miner console displays around 63Mh/s:
![]()
While Nanopool says my average is around 42Mh/s:
![]()
As you can also see, my calculated hashrate is constantly changing. In that picture alone, the highest point is calculated at 93.5Mh/s, while the lowest is 0Mh/s! It clearly changes a lot and often. What could be the cause of this? Thanks!
I'm using Genoil's ethminer 0.9.41-genoil-1.1.6 and the batch file I use to start my miner is:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe --farm-recheck 200 -G -S eth-eu1.nanopool.org:9999 -O 0x4cf189efA0C07321133e97a81593AE7662C89115.USER/EMAIL
Of course "USER" and "EMAIL" are replaced with my miner name and my email.
I have an RX 470 8GB, RX 480 4GB and an RX 480 8GB. I also should mention i'm using Windows 10 Home, I HAVE changed WattMan settings and I DO have custom BIOS for each card
While Nanopool says my average is around 42Mh/s:
As you can also see, my calculated hashrate is constantly changing. In that picture alone, the highest point is calculated at 93.5Mh/s, while the lowest is 0Mh/s! It clearly changes a lot and often. What could be the cause of this? Thanks!
I'm using Genoil's ethminer 0.9.41-genoil-1.1.6 and the batch file I use to start my miner is:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe --farm-recheck 200 -G -S eth-eu1.nanopool.org:9999 -O 0x4cf189efA0C07321133e97a81593AE7662C89115.USER/EMAIL
Of course "USER" and "EMAIL" are replaced with my miner name and my email.
I have an RX 470 8GB, RX 480 4GB and an RX 480 8GB. I also should mention i'm using Windows 10 Home, I HAVE changed WattMan settings and I DO have custom BIOS for each card