Hi All
Been working on this one this weekend.
As per most people this is using the 1500 strap
![]()
power is on auto, and I'm manually setting mem to 980 after flashing and applying a reset, I did notice a few times a reset is not working, change something apply it, then reset to get the reset to apply correctly. then either use watttool or wattman to apply the power for mem, change the core power at your own risk, I saw a lot of issues with thread stuck in driver bsod by having the power to low on core, hence why its on auto.
stock dual mining is 22Mh and quite low power for the rig around 750w
@28MH dual mining you are looking at around 1100w for a 6card rig. so make sure you have the power.
I'm using a 1200w evga P2 @ 230v
Some power savings can be applied to some cards but not all, so if you need better power apply 1 at a time and tweak the power. but I found it got unstable quickly
have fun and flash at your own risk.
Boysie
Been working on this one this weekend.
As per most people this is using the 1500 strap
power is on auto, and I'm manually setting mem to 980 after flashing and applying a reset, I did notice a few times a reset is not working, change something apply it, then reset to get the reset to apply correctly. then either use watttool or wattman to apply the power for mem, change the core power at your own risk, I saw a lot of issues with thread stuck in driver bsod by having the power to low on core, hence why its on auto.
stock dual mining is 22Mh and quite low power for the rig around 750w
@28MH dual mining you are looking at around 1100w for a 6card rig. so make sure you have the power.
I'm using a 1200w evga P2 @ 230v
Some power savings can be applied to some cards but not all, so if you need better power apply 1 at a time and tweak the power. but I found it got unstable quickly
have fun and flash at your own risk.
Boysie